K. Wefers, Alumina Chemicals Science and Technology Handbook

M. S. Rana, J. Ancheyta, S. K. Maity, and P. Rayo, Hydrotreating of Maya Crude Oil, Petroleum Science and Technology, vol.25, pp.187-199, 2011.

D. Wu, J. Zhou, and Y. Li, Mechanical strength of solid catalysts, AIChE J, vol.53, pp.2618-2629, 2007.

S. P. Andrew, Theory and practice of the formulation of heterogeneous catalysts, Chemical Engineering Science, vol.36, pp.1431-1445, 1981.

A. A. Griffith, The Phenomena of Rupture and Flow in Solids, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.221, pp.163-198, 1921.

D. Staub, S. Meille, V. Le-corre, J. Chevalier, and L. Rouleau, Revisiting the Side Crushing Test Using the Three-Point Bending Test for the Strength Measurement of Catalyst Supports, Oil Gas Sci. Technol. -Rev. IFP Energies nouvelles, vol.70, pp.475-486, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01176553

D. Staub, S. Meille, V. Le-corre, L. Rouleau, and J. Chevalier, Identification of a damage criterion of a highly porous alumina ceramic, Acta Materialia, vol.107, pp.261-272, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01398755

S. Meille, M. Lombardi, J. Chevalier, and L. Montanaro, Mechanical properties of porous ceramics in compression: On the transition between elastic, brittle, and cellular behavior, Journal of the European Ceramic Society, vol.32, pp.3959-3967, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01670854

M. F. Ashby and C. G. Sammis, The damage mechanics of brittle solids in compression, PAGEOPH, vol.133, pp.489-521, 1990.

F. Ulm, M. Vandamme, C. Bobko, J. Ortega, K. Tai et al., Statistical Indentation Techniques for Hydrated Nanocomposites, J American Ceramic Society, vol.90, pp.2677-2692, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00555551

K. C. Bennett, L. A. Berla, W. D. Nix, and R. I. Borja, Instrumented nanoindentation and 3D mechanistic modeling of a shale at multiple scales, Acta Geotech, vol.10, pp.1-14, 2015.

P. Clément, S. Meille, J. Chevalier, and C. Olagnon, Mechanical characterization of highly porous inorganic solids materials by instrumented micro-indentation, Acta Materialia, vol.61, pp.6649-6660, 2013.

B. R. Lawn, Indentation of Ceramics with Spheres: A Century after Hertz, 1998.

G. Constantinides, On the use of nanoindentation for cementitious materials, Mater. Struct, vol.36, pp.191-196, 2003.

G. Constantinides, K. S. Ravi-chandran, F. Ulm, and K. J. Van-vliet, Grid indentation analysis of composite microstructure and mechanics, Materials Science and Engineering: A, vol.430, pp.189-202, 2006.

H. Buckle, L'essai de microdureté et applications, 1960.

M. Miller, C. Bobko, M. Vandamme, and F. Ulm, Surface roughness criteria for cement paste nanoindentation, Cement and Concrete Research, vol.38, pp.467-476, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00555544

A. R. Sakulich and V. C. Li, Nanoscale characterization of engineered cementitious composites, vol.41, pp.169-175, 2011.

D. Chiche, M. Digne, R. Revel, C. Chanéac, and J. Jolivet, Accurate Determination of Oxide Nanoparticle Size and Shape Based on X-Ray Powder Pattern Simulation, J. Phys. Chem. C, vol.112, pp.8524-8533, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00347945

L. Roiban, L. Sorbier, C. Pichon, C. Pham-huu, M. Drillon et al., 3D-TEM investigation of the nanostructure of a ?-Al2O3 catalyst support decorated with Pd nanoparticles, vol.4, pp.946-954, 2012.

S. Brunauer, P. H. Emmett, and E. Teller, Adsorption of Gases in Multimolecular Layers, 1938.

E. P. Barrett, L. G. Joyner, and P. P. Halenda, The Determination of Pore Volume and Area Distributions in Porous Substances. I. Computations from Nitrogen Isotherms, 1951.

J. Schindelin, I. Arganda-carreras, E. Frise, V. Kaynig, M. Longair et al., an open-source platform for biological-image analysis, Nature methods, vol.9, pp.676-682, 2012.
URL : https://hal.archives-ouvertes.fr/pasteur-02616466

L. Reimer and H. Kohl, Transmission electron microscopy: Physics of image formation, 2008.

L. R. Herrmann, Backscattering coefficient of multicomponent specimens

D. Berger-and-h and . Niedrig, Complete angular distribution of electrons backscattered from tilted multicomponent specimens

C. J. Lemaitre and J. , Mécanique des milieux continus, Dunod, 2004.

W. C. Oliver and G. M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res, vol.7, pp.1564-1583, 1992.
URL : https://hal.archives-ouvertes.fr/hal-01518596

M. F. Doerner and W. D. Nix, A method for interpreting the data from depth-sensing indentation instruments, J. Mater. Res, vol.1, pp.601-609, 1986.

J. S. Field and M. V. Swain, A simple predictive model for spherical indentation, J. Mater. Res, vol.8, pp.297-306, 1993.

I. N. Sneddon, The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile, International Journal of Engineering Science, vol.3, pp.47-57, 1965.

W. C. Oliver and G. M. Pharr, Measurement of hardness and elastic modulus by instrumented indentation, J. Mater. Res, vol.19, pp.3-20, 2004.

S. I. Bulychev, V. P. Alekhin, M. K. Shorshorov, A. P. Ternovskii, and G. D. , Mechanical properties of materials studied from kinetic diagrams of load versus depth of impression during microimpression, 1975.

L. He, O. C. Standard, T. T. Huang, B. A. Latella, and M. V. Swain, Mechanical behaviour of porous hydroxyapatite, vol.4, pp.577-586, 2008.

A. Bouterf, S. Roux, F. Hild, J. Adrien, E. Maire et al., Digital Volume Correlation Applied to Xray Tomography Images from Spherical Indentation Tests on Lightweight Gypsum, Strain, vol.50, pp.444-453, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01068402

Z. Chen, X. Wang, A. Atkinson, and N. Brandon, Spherical indentation of porous ceramics, Journal of the European Ceramic Society, vol.36, pp.1435-1445, 2016.

J. J. Schwiedrzik and P. K. Zysset, The influence of yield surface shape and damage in the depthdependent response of bone tissue to nanoindentation using spherical and Berkovich indenters, Computer methods in biomechanics and biomedical engineering, vol.18, pp.492-505, 2015.

S. Pathak and S. R. Kalidindi, Spherical nanoindentation stress-strain curves, Materials Science and Engineering: R: Reports, vol.91, pp.1-36, 2015.

B. Benane, S. Meille, G. Foray, B. Yrieix, and C. Olagnon, Instrumented Indentation of Super-Insulating Silica Compacts, Materials, p.12, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02304175

R. L. Coble and W. D. Kingery, Effect of Porosity on Physical Properties of Sintered Alumina, 1956.

H. Wang, Morphological Modelling and Transport Properties of Mesoporous Alumina, 2016.
URL : https://hal.archives-ouvertes.fr/tel-01647174

Q. Ma and D. R. Clarke, Size dependent hardness of silver single crystals, J. Mater. Res, vol.10, pp.853-863, 1995.

S. J. Bull, T. F. Page, and E. H. Yoffe, An explanation of the indentation size effect in ceramics, Philosophical Magazine Letters, vol.59, pp.281-288, 1989.

F. Fröhlich, P. Grau, and W. Grellmann, Performance and analysis of recording microhardness tests, 1977.

G. Q. Quinn, Indentation brittleness of ceramics: a fresh approach, Journal of materials science, pp.4331-4346, 1997.