, Engine Combustion Network, 2019.

L. Pickett, C. Genzale, G. Bruneaux, L. M. Malbec, L. Hermant et al., Comparison of diesel spray combustion in different high-temperature, highpressure facilities, SAE Int. J. Engines, vol.3, pp.156-181, 2010.

M. Meijer, B. Somers, J. Johnson, J. Naber, S. Y. Lee et al., Engine Combustion Network (ECN): Characterization and comparison of boundary conditions for different combustion vessels, Atomization Sprays, vol.22, pp.777-806, 2012.

M. Bardi, R. Payri, L. M. Malbec, G. Bruneaux, L. M. Pickett et al., Engine Combustion Network: Comparison of spray development, vaporization and combustion in different combustion vessels, Atomization Sprays, vol.22, pp.807-842, 2012.

R. Payri, S. Molina, F. J. Salvador, and J. Gimeno, A study of the relation between nozzle geometry, internal flow and sprays characteristics in diesel fuel injection systems, KSME Int. J, vol.18, p.1222, 2004.

R. Payri, F. J. Salvador, J. Gimeno, and J. De-la-morena, Effects of nozzle geometry on direct injection diesel engine combustion process, Appl. Therm. Eng, vol.29, pp.2051-2060, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00637333

A. L. Kastengren, F. Z. Tilocco, C. F. Powell, J. Manin, L. M. Pickett et al., Engine Combustion Network (ECN): Measurements of nozzle diameter and hydraulic behavior of diesel sprays, Atomization Sprays, vol.22, pp.1011-1052, 2012.

M. Bardi, G. Bruneaux, and L. M. Malbec, Study of ECN injectors' behavior repeatability with focus on, SAE Technical Paper, 2016.

R. Payri, J. M. Garcia-oliver, M. Bardi, and J. Manin, Fuel temperature influence on diesel sprays in inert and reacting conditions, Appl. Therm. Eng, vol.35, pp.185-195, 2012.

M. Meijer, J. Galle, L. M. Somers, J. G. Griensven, and S. Verhelst, High-speed characterization of ECN spray A using various diagnostic techniques, SAE Int. J. Engines, vol.6, pp.1238-1248, 2013.

J. E. Nesbitt, Diesel spray mixing limited vaporization with non-ideal and multi-component fuel thermophysical property effects, 2011.

L. Zhao, An experimental and computational study of fuel spray interaction: Fundamentals and engine applications, 2018.

Y. Pei, M. J. Davis, L. M. Pickett, and S. Soma, Engine Combustion Network (ECN): Global sensitivity analysis of Spray A for different combustion vessels, Combust. Flame, vol.162, pp.2337-2347, 2015.

J. E. Nesbitt, S. E. Johnson, L. M. Pickett, D. L. Siebers, S. Y. Lee et al., Minor species production from lean premixed combustion and their impact on auto-ignition of diesel surrogates, Energy Fuels, vol.25, pp.926-936, 2011.

R. Payri, J. P. Vieraa, H. Wang, and L. Malbec, Velocity field analysis of the high density, high pressure diesel spray, Int. J. Multiph. Flow, vol.80, pp.69-78, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01398736

L. M. Malbec and G. Bruneaux, Study of air entrainment of multi-hole diesel injection by particle image velocimetryeffect of neighboring jets interaction and transient behavior after end of injection, SAE Int. J. Engines, vol.3, pp.107-123, 2010.

P. Sphicas, L. Pickett, S. Skeen, and J. Frank, ECN experimental database, 2017.

Y. Pei, S. Som, and J. M. Garcia-oliver, Bridging the gap: How spray details affect combustion, 2014.

J. Pastor, J. M. Garcia-oliver, A. Garcia, W. Zhong, C. Mico et al., An experimental study on diesel spray injection into a non-quiescent chamber, SAE Int. J. Fuels Lubricants, vol.10, pp.394-406, 2017.

C. Hespel, M. Ben-houidi, H. Ajrouche, F. Foucher, Y. Haidous et al., Characterization of the ECN spray A in different facilities. Part 2: Spray vaporization and combustion, Oil Gas Sci. Technol. -Rev, 2020.
URL : https://hal.archives-ouvertes.fr/hal-02813373

C. Strozzi, J. Sotton, A. Mura, and M. Bellenoue, Experimental and numerical study of the influence of temperature heterogeneities on self-ignition process of methane-air mixtures in a rapid compression machine, Combust. Sci. Technol, vol.180, pp.1829-1857, 2008.

C. Strozzi, A. Mura, J. Sotton, and M. Bellenoue, Experimental analysis of propagation regimes during the autoignition of a fully premixed methane-air mixture in the presence of temperature inhomogeneities, Combust. Flame, vol.159, pp.3323-3341, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00772646

M. Ben-houidi, J. Sotton, and M. Bellenoue, Interpretation of auto-ignition delays from RCM in the presence of temperature heterogeneities: Impact on combustion regimes and negative temperature coefficient behavior, Fuel, vol.186, pp.476-495, 2016.

M. Ben-houidi, J. Sotton, A. Claverie, C. Strozzi, and M. Bellenoue, Application of high-speed PIV and Toluene PLIF techniques to study aerodynamics and thermal stratification inside a flat piston rapid compression machine, 18th International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics, 2016.

M. Ben-houidi, J. Sotton, M. Bellenoue, and C. Strozzi, Effects of low temperature heat release on the aerodynamics of a flat piston rapid compression machine: Impact on velocity and temperature fields, Proc. Combust. Inst, vol.37, pp.4777-4785, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02282648

O. Nilaphai, C. Hespel, B. Moreau, F. Contino, N. Bourgeois et al., New high-pressure and high-temperature chamber for diesel spray characterization, 27th Annual Conference on Liquid Atomization and Spray Systems, 2016.

O. Nilaphai, Vaporization and combustion processes of alcohols and Acetone-Butanol-Ethanol (ABE) blended in n-dodecane for high pressure-high temperature conditions: Application to compression ignition engine, 2018.
URL : https://hal.archives-ouvertes.fr/tel-02095626

W. E. Eagle, M. P. Musculus, L. M. Malbec, and G. Bruneaux, Measuring transient entrainment rates of a confined vaporizing diesel jet, ILASS Americas 26th Annual Conference on Liquid Atomization and Spray Systems, 2014.

A. Sciacchitano, F. Scarano, and B. Wieneke, Multi-frame pyramid correlation for time-resolved PIV, Exp. Fluids, vol.53, pp.1087-1105, 2012.

M. Ben-houidi, K. Yasutomi, and R. Fitzgerald, , p.5, 2017.

P. R. Childs, J. R. Greenwood, and C. A. Long, Review of temperature measurement, Rev. Sci. Instrum, vol.71, pp.2959-2978, 2000.

J. F. Griffiths, J. P. Macnamara, C. G. Sheppard, D. A. Turton, and B. J. Whitaker, The relationship of knock during controlled autoignition to temperature inhomogeneities and fuel reactivity, Fuel, vol.81, pp.2219-2225, 2002.

C. Strozzi, J. Sotton, A. Mura, and M. Bellenoue, Characterization of a two dimensional temperature field within a rapid compression machine using a toluene planar laser induced fluorescence imaging technique, Meas. Sci. Technol, vol.20, p.125403, 2009.

K. H. Tran, P. Guibert, C. Morin, J. Bonnety, S. Pounkin et al., Temperature measurements in a rapid compression machine using anisole planar laser-induced fluorescence, Combust. Flame, vol.162, pp.3960-3970, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01524469

P. Desgroux, L. Gasnot, and L. Sochet, Instantaneous temperature measurement in a rapid-compression machine using laser rayleigh scattering, Appl. Phys. B, vol.61, pp.69-72, 1995.

J. Clarkson, J. F. Griffiths, J. P. Macnamara, and B. Whitaker, Temperature fields during the development of combustion in a rapid compression machine, Combust. Flame, vol.125, pp.1162-1175, 2001.

R. B. Miles, W. R. Lempert, and J. N. Forkey, Laser Rayleigh scattering, Meas. Sci. Technol, vol.12, pp.33-51, 2001.

M. Uddi, A. K. Das, and C. Sung, Temperature measurements in a rapid compression machine using Mid-IR H2O absorption spectroscopy near 7.6 lm, Appl. Opt, vol.51, pp.5464-5476, 2012.

A. K. Das, M. Uddi, and C. Sung, Two-line thermometry and H2O measurement for reactive mixtures in rapid compression machine near 7.6 lm, Combust. Flame, vol.159, pp.3493-3501, 2012.

E. F. Nasir and A. Farooq, Time-resolved temperature measurements in a rapid compression machine using quantum cascade laser absorption in the intrapulse mode, Proc. Combust. Inst, vol.36, pp.4453-4460, 2017.

F. Förster, C. Crua, M. Davy, and P. Ewart, Temperature measurements under diesel engine conditions using laser induced grating spectroscopy, Combust. Flame, vol.199, pp.249-257, 2019.

F. J. Förster, C. Crua, M. Davy, and P. Ewart, Time-resolved gas thermometry by laser-induced grating spectroscopy with a high-repetition rate laser system, Exp. Fluids, vol.58, p.87, 2017.

R. A. Patton, K. N. Gabet, N. Jiang, W. R. Lempert, and J. A. Sutton, Multi-kHz temperature imaging in turbulent non-premixed flames using planar Rayleigh scattering, Appl. Phys. B: Lasers Opt, vol.108, pp.377-392, 2012.

J. D. Miller, M. N. Slipchenko, T. R. Meyer, H. U. Stauffer, and J. R. Gord, Hybrid femtosecond/picosecond coherent anti-Stokes Raman scattering for high-speed gas-phase thermometry, Opt. Lett, vol.35, pp.2430-2432, 2010.

B. N. Sun, J. Chang, J. Lian, Z. L. Wang, G. P. Lv et al., Accuracy improvement of Raman distributed temperature sensors based on eliminating Rayleigh noise impact, Opt. Commun, vol.306, pp.117-120, 2013.

M. V. Heitor and A. L. Moreira, Thermocouples and sample probes for combustion studies, Prog. Energy Combust. Sci, vol.19, pp.259-278, 1993.

P. Paranthoen and J. Lecordier, Mesures de temperature dans les ecoulements turbulents, Rev. Gen. Therm, vol.35, pp.283-308, 1996.

P. Paranthoen, J. Lecordier, C. Petit, and P. Gajan, Survey and Recent developments of frequency response studies of cold wires and fine wire thermocouples in turbulent heated flow, Eighth Austalasian Fluid Mechanics Conference, 1983.

M. Tagawa, K. Kato, and Y. Ohta, Response compensation of fine wire temperature sensors, Rev. Sci. Instrum, vol.76, p.94904, 2005.

G. Arwatz, C. Bahri, A. J. Smits, and M. Hultmark, Dynamic calibration and modeling of a cold wire for temperature measurement, Meas. Sci. Technol, vol.24, p.125301, 2013.

A. Dupont, P. Paranthoen, J. C. Lecordier, and P. Gajan, Influence of temperature on the frequency response of finewire thermocouples over the range (300K-800K) in airflows, J. Phys. E: Sci. Instrum, vol.17, pp.808-812, 1984.
URL : https://hal.archives-ouvertes.fr/hal-00648332

L. Thierry, Microsondes thermoelectriques, Techniques de l'ingenieur R 2, vol.765, pp.1-24, 2006.

W. Pitts, E. Braun, R. Peacock, H. Mitler, E. Johnsson et al., Temperature uncertainties for bare-bead and aspirated thermocouple measurements in fire environments, pp.3-15, 2003.

J. H. Kent, A noncatalytic coating for platinumrhodium thermocouples, Combust. Flame, vol.28, p.301, 1970.

J. M. Madson and E. A. Theby, SiO2 coated thermocouples, Combust. Sci. Technol, vol.36, pp.205-209, 1983.

F. R. Caldwell, Thermocouple materials, National Bureau of Standards Monograph, issue.40, 1962.

R. Betchov, L'influence de la conduction thermiquesur les anenometres a fils chauds, Proc. Koninklijke Nederlandse Akademie van Wetenschappen 51, p.721, 1948.

S. Corrsin, Turbulence: experimental methods, Encycl. Phys, vol.3, pp.524-590, 1963.

D. C. Collis and M. J. Williams, Two dimensional convection from heated wires at low Reynolds numbers, J. Fluid Mech, vol.6, pp.357-384, 1959.

D. C. Collis and M. J. Williams, Two-dimensional convection from heated wires at low Reynolds Numbers, J. Fluid Mech, vol.6, pp.357-384, 1959.

H. Kramers, Heat transfer from spheres to flowing media, Physica, vol.12, pp.61-80, 1946.

S. W. Churchill and M. Bernstein, A correlating equation for forced convection from gases and liquids to a circular cylinder in crossflow, J. Heat Trans, vol.99, pp.300-306, 1977.

Y. Pei, S. Som, and J. M. Garcia-oliver, , p.3, 2014.

. Fig, Raw Schlieren images showing thermocouple 4 position and the qualitative density gradients in the RCM chamber at different instants: test condition of Figure 22b