P. Koukouvinis, M. Gavaises, J. Li, and L. Wang, Large Eddy Simulation of Diesel injector 2 including cavitation effects and correlation to erosion damage, Fuel, vol.175, pp.26-39, 2016.

G. Kähler, ;. , F. Bonelli, ;. , G. Gonnella et al., Cavitation inception of a van der Waals 5 fluid at a sack-wall obstacle, Phys. Fluids, vol.27, issue.123307, 2015.

H. Z. ,

Z. Z. , K. A. Mørch, ;. , and S. Liu, Thermodynamic 7 effects on Venturi cavitation characteristics, Phys. Fluids, vol.31, issue.9, 2019.

P. Koukouvinis, C. Bruecker, and M. Gavaises, Unveiling the physical mechanism behind pistol 9 shrimp cavitation, Sci. Rep, vol.7, issue.13994, 2017.

W. H. Nurick, Orifice Cavitation and Its Effect on Spray Mixing, J. Fluids Eng, vol.98, pp.11-681, 1976.

F. Payri, V. Bermúdez, R. Payri, and F. J. Salvador, The influence of cavitation on the internal 13 flow and the spray characteristics in diesel injection nozzles, Fuel, vol.83, issue.4-5, p.431, 2004.

M. Blessing, G. König, C. Krüger, U. Michels, and V. Schwarz, Analysis of Flow and Cavitation 16 Phenomena in Diesel Injection Nozzles and Its Effects on Spray and Mixture Formation, 17 SAE Technical Paper Series, 2010.

C. Habchi, N. Dumont, and O. Simonin, Multidimensional Simulation of Cavitating Flows in

, Diesel Injectors By a Homogeneous Mixture Modeling Approach, At. Sprays, vol.18, issue.2, pp.129-162, 2008.

H. Yu, L. Goldsworthy, P. A. Brandner, and V. Garaniya, Development of a compressible 22 multiphase cavitation approach for diesel spray modelling, Appl. Math. Model, vol.45, p.24, 2017.

H. K. Suh and C. S. Lee, Effect of cavitation in nozzle orifice on the diesel fuel atomization 25 characteristics, Int. J. Heat Fluid Flow, vol.29, issue.4, pp.1001-1009, 2008.

C. Badock, R. Wirth, A. Fath, and A. Leipertz, Investigation of cavitation in real size diesel 27 injection nozzles, Int. J. Heat Fluid Flow, vol.20, issue.5, pp.538-544, 1999.

D. Bauer, H. Chaves, and C. Arcoumanis, Measurements of void fraction distribution in 29 cavitating pipe flow using x-ray CT, Meas. Sci. Technol, vol.23, issue.5, p.55302, 2012.

E. Giannadakis, M. Gavaises, and C. Arcoumanis, Modelling of cavitation in diesel injector 31 nozzles, J. Fluid Mech, vol.616, pp.153-193, 2008.

D. J. Duke, X-ray radiography measurements and numerical simulations of cavitation in 33 a metal nozzle, ILASS Americas 28th Annual Conference on Liquid Atomization and Spray 34 Systems, 2016.

D. J. Duke, X-ray radiography of cavitation in a beryllium alloy nozzle, Int. J. Engine 36 Res, vol.18, issue.1-2, pp.39-50, 2017.

J. M. Desantes, F. J. Salvador, M. Carreres, and J. Martínez-lópez, Large-eddy simulation 38 analysis of the influence of the needle lift on the cavitation in diesel injector nozzles, Proc

, Inst. Mech. Eng. Part D J. Automob. Eng, vol.229, issue.4, pp.407-423, 2014.

S. Molina, F. J. Salvador, M. Carreres, and D. Jaramillo, A computational investigation on the 1 influence of the use of elliptical orifices on the inner nozzle flow and cavitation development 2 in diesel injector nozzles, Energy Convers. Manag, vol.79, pp.114-127, 2014.

Y. Delannoy, Two Phase Flow Approach in Unsteady Cavitation Modelling, Cavitation 4 and Multiphase Flow Forum, 1990.

M. Battistoni, S. Som, and D. E. Longman, Comparison of Mixture and Multifluid Models for

, Nozzle Cavitation Prediction, J. Eng. Gas Turbines Power, vol.136, issue.6, p.61506, 2014.

M. Battistoni, D. J. Duke, A. B. Swantek, F. Z. Tilocco, C. F. Powell et al., Effects of
URL : https://hal.archives-ouvertes.fr/inserm-01871312

, Noncondensable Gas on Cavitating Nozzles, At. Sprays, vol.25, issue.6, pp.453-483, 2015.

C. Habchi, a Gibbs Energy Relaxation (Germ) Model for Cavitation Simulation, At. Sprays, vol.10, issue.4, pp.317-334, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01174687

Y. Wang, L. Qiu, R. D. Reitz, and R. Diwakar, Simulating cavitating liquid jets using a 12 compressible and equilibrium two-phase flow solver, Int. J. Multiph. Flow, vol.63, pp.52-67, 2014.

A. Alajbegovic, G. Meister, D. Greif, and B. Basara, Three phase cavitating flows in high-15 pressure swirl injectors, Exp. Therm. Fluid Sci, vol.26, pp.677-681, 2002.

H. Roth, Effect of Multi-Injection Strategy on Cavitation Development in Diesel Injector 17 Nozzle Holes, SAE Technical Paper Series, 2005.

X. Lyu, S. Pan, X. Hu, and N. A. Adams, Numerical investigation of homogeneous cavitation 19 nucleation in a microchannel, Phys. Rev. FLUIDS, vol.064303, pp.1-15, 2018.

W. Yuan, J. Sauer, and G. H. Schnerr, Modeling and computation of unsteady cavitation flows 21 in injection nozzles, Mec. Ind, vol.2, issue.5, pp.383-394, 2001.

F. Petitpas, J. Massoni, R. Saurel, E. Lapebie, and L. Munier, Diffuse interface model for high 23 speed cavitating underwater systems, Int. J. Multiph. Flow, 2009.

C. Rodriguez, ;. , A. Vidal, ;. , P. Koukouvinis et al., Simulation of 25 transcritical fluid jets using the PC-SAFT EoS, J. Comput. Phys, vol.374, pp.444-468, 2018.

J. Matheis and S. Hickel, Multi-component vapor-liquid equilibrium model for LES of high-27 pressure fuel injection and application to ECN Spray A, Int. J. Multiph. Flow, 2017.

S. Yang, P. Yi, and C. Habchi, Real-fluid injection modelling and LES simulation of the ECN

, Spray A injector using a fully compressible two-phase flow approach, Int. J. Multiph. Flow, pp.31-103145, 2019.

C. Habchi, J. Bohbot, A. Schmid, and K. Herrmann, A comprehensive Two-Fluid Model for 33 Cavitation and Primary Atomization Modelling of liquid jets -Application to a large marine 34 Diesel injector, J. Phys. Conf. Ser, vol.656, issue.1, 2015.

R. Saurel, P. Boivin, and O. L. Métayer, A general formulation for cavitating, boiling and 36 evaporating flows, Comput. Fluids, vol.128, pp.53-64, 2016.

R. Saurel, F. Petitpas, and R. Abgrall, Modeling phase transition in metastable liquids. 38 pplication to flashing and cavitating flows, Int. J. Multiph. Flow, vol.607, pp.313-350, 2008.

O. , L. Métayer, and R. Saurel, The Noble-Abel Stiffened-Gas equation of state, Phys. Fluids, vol.40, issue.4, pp.0-33, 2016.

L. M. Olivier, J. Massoni, and R. Saurel, Élaboration des lois d'état d'un liquide et de sa

E. Lauer, X. Y. Hu, S. Hickel, and N. A. Adams, Numerical modelling and investigation of 3 symmetric and asymmetric cavitation bubble dynamics, Comput. Fluids, vol.69, p.2012

H. Yu, L. Goldsworthy, P. A. Brandner, J. Li, and V. Garaniya, Modelling thermal effects in 6 cavitating high-pressure diesel sprays using an improved compressible multiphase approach

, Fuel, vol.222, pp.125-145, 2018.

P. Yi, S. Yang, C. Habchi, and R. Lugo, A multicomponent real-fluid fully compressible four-9 equation model for two-phase flow with phase change, Phys. Fluids, vol.31, issue.2, p.2019

R. Menikoff and B. J. Plohr, The Riemann problem for fluid flow of real materials, Rev. Mod

. Phys, , 1989.

R. Saurel and P. Boivin, Cavitation Instabilities and Rotordynamic Effects in Turbopumps and 14

. Hydroturbines, , vol.575, 2017.

A. B. Wood, A Textbook of Sound, 1955.

D. J. Duke, A. L. Kastengren, F. Z. Tilocco, A. B. Swantek, and C. F. Powell, X-Ray Radiography 17 Measurements of Cavitating Nozzle Flow, At. Sprays, vol.23, issue.9, pp.841-860, 2013.

D. J. Duke, A. L. Kastengren, A. B. Swantek, K. E. Matusik, and C. F. Powell, X-ray fluorescence 19 measurements of dissolved gas and cavitation, Exp. Fluids, 2016.

M. Karaeen and E. Sher, SPRAY CHARACTERISTICS OF DIESEL FUEL CONTAINING DISSOLVED 21 CO2 SPRAY CHARACTERISTICS OF DIESEL FUEL, At. Sprays, vol.21, issue.11, 2011.

A. Rashkovan and E. Sher, Flow pattern observations of gasoline dissolved CO2 inside an 23 injector, At. Sprays, vol.16, issue.6, 2006.

I. Y. Senda, J. Hashimoto, K. , and F. H. , CO? Mixed Fuel Combustion System for Reduction of NO 25 and Soot Emission in Diesel Engine, SAE Trans, pp.471-481, 1997.

A. Xiao, J. , Z. Huang, M. Junjun, and Q. Xinqi, An experimental study on spray transient 27 characteristics in fuel containing CO2, At. Sprays, vol.19, issue.4, p.28, 2009.

Z. Huang, Y. Shao, S. Shiga, and H. Nakamura, Controlling mechanism and resulting spray 29 characteristics of injection of fuel containing dissolved gas, J. Therm. Sci, vol.3, issue.3, pp.30-191, 1994.

H. Zhang, Z. Zuo, and S. Liu, Influence of dissolved gas content on Venturi cavitation at 32 thermally sensitive conditions, Proceedings of the 10th International Symposium on, p.33

, Cavitation (CAV2018), pp.546-550, 2018.

A. Amini, M. Reclari, T. Sano, and M. Farhat, Effect of Gas Content on Tip Vortex Cavitation, 35 in Proceedings of the 10th International Symposium on Cavitation, pp.322-325, 2018.

S. Gireesan and A. B. Pandit, Modeling the effect of carbon-dioxide gas on cavitation

, Ultrason. -Sonochemistry, vol.34, pp.721-728, 2017.

S. Yang, C. Habchi, P. Yi, and R. Lugo, Cavitation Modelling Using Real-Fluid Equation of

. State, Proceedings of the 10th International Symposium on Cavitation(CAV2018), 2018.

S. Yang, Modeling of Diesel injection in subcritical and supercritical conditions, p.41
URL : https://hal.archives-ouvertes.fr/tel-02296577

. Paris-saclay, , 2019.

, This is the author's peer reviewed, accepted manuscript. However, the online version of record will be different from this version once it has been copyedited and typeset, PLEASE CITE THIS ARTICLE AS

M. S. Baer and J. W. Nunziato, A two-phase mixture theory for the deflagration to detonation 1 (DDT) transition in reactive granular materials, Int. J. Multiph. Flow, vol.12, issue.6, p.889, 1986.

T. C. Horng, M. Ajlan, L. L. Lee, K. E. Starling, and M. Ajlan, Generalized Multiparameter 4 Correlation for Nonpolar and Polar Fluid Transport Properties, Ind. Eng. Chem. Res, vol.27, issue.4, pp.671-679, 1988.

B. E. Poling, J. M. Prausnitz, and J. P. O'connell, The Properties of Gases and Liquids, 2001.

S. Saha and J. J. Carroll, The isoenergetic-isochoric flash, Fluid Phase Equilib, vol.138, pp.23-41, 1997.

F. A. Aly and L. L. Lee, Self-consistent equations for calculating the ideal gas heat capacity, 10 enthalpy, and entropy, Fluid Phase Equilib, vol.6, issue.3-4, pp.169-179, 1981.

G. Wilczek-vera and J. H. Vera, Understanding cubic equations of state: A search for the 12 hidden clues of their success, AIChE J, vol.61, issue.9, pp.2824-2831, 2015.

J. Bohbot, N. Gillet, and A. Benkenida, IFP-C3D: an Unstructured Parallel Solver for Reactive 14

, Numerical heat transfer and fluid flow: Computational methods in mechanics and 16 thermal science, Compressible Gas Flow with Spray, vol.64, pp.309-335, 1980.

A. Zein, M. Hantke, and G. Warnecke, Modeling phase transition for compressible two-phase 18 flows applied to metastable liquids, J. Comput. Phys, vol.229, issue.8, pp.2964-2998, 2010.

A. Chiapolino, P. Boivin, and R. Saurel, A simple and fast phase transition relaxation solver for 20 compressible multicomponent two-phase flows, Comput. Fluids, vol.150, pp.31-45, 2017.

B. Li, Y. Gu, and M. Chen, An experimental study on the cavitation of water with dissolved 22 gases, Exp. Fluids, vol.58, issue.12, pp.1-9, 2017.

P. J. Linstrom and W. G. Mallard, The NIST Chemistry WebBook: A chemical data resource on 24 the Internet, J. Chem. Eng. Data, vol.46, issue.5, pp.1059-1063, 2001.

D. Duke, X-ray Imaging of Cavitation in Diesel Injectors, SAE Int. J. Engines, vol.7, issue.2, pp.26-2014, 2014.

D. J. Duke,

C. Mauger, L. Méès, M. Michard, A. Azouzi, and S. Valette, Shadowgraph, Schlieren and 30 interferometry in a 2D cavitating channel flow, Exp. Fluids, vol.53, issue.6, p.2012

S. Gopalan and J. Katz, Flow structure and modeling issues in the closure region of attached 33 cavitation, Phys. Fluids, vol.12, issue.4, 2000.

P. Yi, S. Jafari, S. Yang, and C. Habchi, Numerical analysis of subcritical evaporation and 35 transcritical mixing of droplet using a tabulated multicomponent vapor-liquid equilibrium 36 model, ILASS-Europe 2019, 29th Conference on Liquid Atomization and Spray Systems, vol.37, p.2019

S. Brown, Thermodynamic interpolation for the simulation of two-phase flow of non-39 ideal mixtures, Comput. Chem. Eng, vol.95, pp.49-57, 2006.