I. A. Khalek, T. L. Bougher, and P. M. Merritt, Phase 1 Of The Advanced Collaborative Emissions Study, SwRI Project No. 03, pp.1-158, 2009.

H. Dwyer, A. Ayala, S. Zhang, and J. Collins, Emissions from a diesel car during regeneration of an active diesel particulate filter, J. Aerosol Sci, vol.41, pp.541-552, 2010.

L. M. Pickett and D. L. Siebers, Non-Sooting, Low Flame Temperature Mixing-Controlled DI Diesel Combustion, SAE Technical Paper, 1399.

R. K. Gehmlich, C. J. Mueller, D. J. Ruth, and C. W. Nilsen, Using ducted fuel injection to attenuate or prevent soot formation in mixing-controlled combustion strategies for engine applications, App. Energy, vol.226, pp.1169-1186, 2018.

M. Blessing, G. König, C. Krüger, and U. Michels, Analysis of Flow and Cavitation Phenomena in Diesel Injection Nozzles and Its Effects on Spray and Mixture Formation

R. Payri, J. M. García, F. J. Salvador, and J. Gimeno, Using spray momentum flux measurements to understand the influence of diesel nozzle geometry on spray characteristics, Fuel, vol.84, pp.551-561, 2005.

F. Payri, J. Arrègle, J. J. López, and S. Hermens, Effect of Cavitation on the Nozzle Outlet Flow, Spray and Flame Formation in a Diesel Engine, SAE Technical Paper, 1391.

J. M. Desantes, R. Payri, F. J. Salvador, J. De-la, and M. , Influence of cavitation phenomenon on primary break-up and spray behavior at stationary conditions, Fuel, vol.89, pp.3033-3041, 2010.

S. Som, A. I. Ramirez, D. E. Longman, and S. K. Aggarwal, Effect of nozzle orifice geometry on spray, combustion, and emission characteristics under diesel engine conditions, Fuel, vol.90, pp.1267-1276, 2011.

F. R. Westlye, M. Battistoni, S. A. Skeen, and J. Manin, Penetration and Combustion Characterization of Cavitating and Non-Cavitating Fuel Injectors under Diesel Engine Conditions

J. V. Pastor, J. M. García-oliver, A. García, and A. M. López, An Experimental Investigation on Spray Mixing and Combustion Characteristics for Spray C/D Nozzles in a Constant Pressure Vessel, 1783.

L. M. Pickett, D. L. Siebers, and C. A. Idicheria, Relationship Between Ignition Processes and the Lift-Off Length of Diesel Fuel Jets

L. M. Pickett, J. Manin, C. L. Genzale, and D. L. Siebers, Relationship between diesel fuel spray vapor penetration/dispersion and local fuel mixture fraction, SAE Int. J. Engines, vol.2, pp.764-799, 2011.

F. Payri, J. Lopez, A. Garcia, and O. De-la-garza-de-leon, Effects of Cavitation in Common-Rail Diesel Nozzles on the Soot Formation Process

J. Tang, S. Pischinger, M. Lamping, T. Körfer, M. Tatur et al., Coking phenomena in nozzle orifices of DI-diesel engines, SAE Int. J. Fuels Lubr, vol.2, issue.1, pp.259-272, 2009.

O. Asi, Failure of a diesel engine injector nozzle by cavitation damage, Eng. Fail. Anal, vol.13, pp.1126-1133, 2006.

M. Bardi, R. Payri, L. M. Malbec, and G. Bruneaux, Engine combustion network (ECN): comparison of spray development, vaporization, and combustion in different combustion vessels, Atomization Spray, vol.22, issue.10, pp.807-842, 2012.

M. Meijer, L. M. Somers, J. Johnson, and J. Naber, Engine combustion network (ECN): characterization and comparison of boundary conditions for different combustion vessels, Atomization Spray, vol.22, issue.9, pp.777-806, 2012.

N. Maes, M. Meijer, N. Dam, and B. Somers, Characterization of Spray A flame structure for parametric variations in ECN constant-volume vessels using chemiluminescence and laser-induced fluorescence, Combust. Flame, vol.174, pp.138-151, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01518354

W. T. Chung, P. C. Ma, and M. Ihme, Examination of diesel spray combustion in supercritical ambient fluid using large-eddy simulations, Int. J. Engine Res, vol.21, pp.122-133, 2020.

E. J. Pérez-sánchez, J. M. Garcia-oliver, R. Novella, and J. M. Pastor, Understanding the diesel-like spray characteristics applying a flamelet-based combustion model and detailed large eddy simulations, Int. J. Engine Res, vol.21, pp.134-150, 2020.

O. T. Kaario, V. Vuorinen, H. Kahila, and H. Im, The effect of fuel on high velocity evaporating fuel sprays: Large-Eddy simulation of Spray A with various fuels, Int. J. Engine Res, vol.21, pp.26-42, 2020.

F. Tagliante, T. Poinsot, L. M. Pickett, and P. Pepiot, A conceptual model of the flame stabilization mechanisms for a lifted Diesel-type flame based on direct numerical simulation and experiments, Combust. Flame, vol.201, pp.65-77, 2019.
URL : https://hal.archives-ouvertes.fr/hal-01998335

P. C. Ma, H. Wu, T. Jaravel, and L. Bravo, Large-eddy simulations of transcritical injection and auto-ignition using diffuse-interface method and finite-rate chemistry, Proc. Combust. Inst, vol.37, pp.3303-3310, 2019.

P. Kundu, M. Ameen, C. Xu, and U. Unnikrishnan, Implementation of detailed chemistry mechanisms in engine simulations, ASME J. Eng. Gas Turbines Power, vol.141, issue.1, p.11026, 2019.

T. Lucchini, D. Pontoni, G. Errico, and B. Somers, Modeling diesel combustion with tabulated kinetics and different flame structure assumptions based on flamelet approach, Int. J. Engine Res, vol.21, pp.89-100, 2020.

A. Krisman, E. R. Hawkes, and J. H. Chen, A parametric study of ignition dynamics at ECN Spray A thermochemical conditions using 2D DNS, Proc. Combust. Inst, vol.37, pp.4787-4795, 2019.

J. Pastor, R. Payri, J. García-oliver, and J. Nerva, Schlieren Measurements of the ECN-Spray A Penetration under Inert and Reacting Conditions

B. Higgins and D. Siebers, Measurement of the Flame Lift-Off Location on DI Diesel Sprays Using OH Chemiluminescence

F. R. Westlye, K. Penney, A. Ivarsson, and L. M. Pickett, Diffuse back-illumination setup for high temporally resolved extinction imaging, Appl. Opt, vol.56, issue.17, pp.5028-5038, 2017.

J. Manin, L. Pickett, and S. Skeen, Two-color diffused back-illumination imaging as a diagnostic for time-resolved soot measurements in reacting sprays, SAE Int. J. Engines, vol.6, pp.1908-1921, 2013.

M. Bardi, G. Bruneaux, and L. Malbec, Study of ECN Injectors' Behavior Repeatability with Focus on Aging Effect and Soot Fluctuations

J. V. Pastor, J. M. García-oliver, R. Novella, and T. Xuan, Soot quantification of singlehole diesel sprays by means of extinction imaging, SAE Int. J. Engines, vol.8, pp.2068-2077, 2015.

S. A. Skeen, J. Manin, L. M. Pickett, and E. Cenker, A progress review on soot experiments and modeling in the engine combustion network (ECN), SAE, Int. J. Engines, vol.9, pp.883-898, 2016.

R. A. Dobbins and C. M. Megaridis, Absorption and scattering of light by polydisperse aggregates, Appl. Opt, vol.30, pp.4747-4754, 1991.

S. Skeen, K. Yasutomi, E. Cenker, and B. Adamson, Standardized optical constants for soot quantification in high-pressure sprays, SAE Int. J. Engines, vol.11, pp.805-816, 2018.

O. Angrill, H. Geitlinger, T. Streibel, and R. Suntz, Influence of exhaust gas recirculation on soot formation in diffussion flames, Proc. Combust. Inst, vol.28, pp.2643-2649, 2000.

F. Liu, H. Guo, G. J. Smallwood, and Ö. L. Gülder, The chemical effects of carbon dioxide as an additive in an ethylene diffusion flame: implications for soot and NO_x formation, Combust. Flame, vol.125, pp.778-787, 2001.

A. Katoh, M. Shinoda, K. Kitagawa, and A. K. Gupta, Visualization of steam addition effect on OH distribution in a flame by isotope shift/planar laser-induced fluorescence (IS/PLIF) spectroscopy, ASME J. Eng. Gas Turbines Power, vol.128, pp.8-12, 2004.

H. Guo and G. J. Smallwood, A numerical study on the influence of CO 2 addition on soot formation in an ethylene/air diffusion flame, Combust. Sci. Technol, vol.180, pp.1695-1708, 2008.

F. Liu, J. L. Consalvi, and A. Fuentes, Effects of water vapor addition to the air stream on soot formation and flame properties in a laminar coflow ethylene/air diffusion flame, Combust. Flame, vol.161, pp.1724-1734, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01459380

P. Ni and X. Wang, Modeling the formation of NO_x and soot emissions in a diesel engine at different humidity, Int. J. Green Energy, vol.9, pp.815-828, 2012.

X. Li, Z. Xu, C. Guan, and Z. Huang, Impact of exhaust gas recirculation (EGR) on soot reactivity from a diesel engine operating at high load, App. Therm. Eng, vol.68, pp.100-106, 2014.

Y. Gallo, V. B. Malmborg, J. Simonsson, and E. Svensson, Investigation of latecycle soot oxidation using laser extinction and in-cylinder gas sampling at varying inlet oxygen concentrations in diesel engines, Fuel, vol.193, pp.308-314, 2017.

C. Patel, C. Hespel, T. L. Nguyen, and F. Foucher, Effect of Exhaust Gas Recirculation composition on soot in ECN Spray A conditions, OGST (2020)

M. P. Musculus, J. E. Dec, D. R. Tree, and D. Daly, Effects of Water-Fuel Emulsions on Spray and Combustion Processes in a Heavy-Duty DI Diesel Engine

M. P. Musculus and K. Kattke, Entrainment waves in diesel jets, SAE Int. J. Engines, vol.2, issue.1, pp.1170-1193, 2009.

L. M. Pickett and D. L. Siebers, An investigation of diesel soot formation processes using micro-orifices, Proc. Combust. Inst, vol.29, pp.655-662, 2002.

M. Bardi, G. Bruneaux, A. Nicolle, and O. Colin, Experimental Methodology for the Understanding of Soot-Fuel Relationship in Diesel Combustion: Fuel Characterization and Surrogate Validation

R. Payri, J. Gimeno, J. Cuisano, and J. Arco, Hydraulic characterization of diesel engine single-hole injectors, Fuel, vol.180, pp.357-366, 2016.

L. M. Pickett,

N. Maes,

S. A. Skeen, J. Manin, and L. M. Pickett, Simultaneous formaldehyde PLIF and high-speed schlieren imaging for ignition visualization in high-pressure spray flames, Proc. Combust. Inst, vol.35, pp.3167-3174, 2015.

N. Maes, N. Dam, B. Somers, and T. Lucchini, Heavy-Duty Diesel Engine Spray Combustion Processes: Experiments and Numerical Simulations, SAE Technical, 1689.

P. Lillo, L. Pickett, H. Persson, and O. Andersson, Diesel spray ignition detection and spatial/temporal correction, SAE Int. J. Engines, vol.5, pp.1330-1346, 2012.

N. Maes, P. C. Bakker, N. Dam, and B. Somers, Transient flame development in a constant-volume vessel using a split-scheme injection strategy, SAE Int. J. Fuels Lubr

N. Maes, Applied Thermal Engineering, vol.172, p.115136, 2020.

P. Laven,

D. Siebers, Liquid-Phase Fuel Penetration in Diesel Sprays, SAE Technical Paper 980809

R. Payri, J. M. García-olivier, M. Bardi, and J. Manin, Fuel temperature influence on diesel sprays in inert and reacting conditions, App. Therm. Eng, vol.35, pp.185-195, 2012.

L. M. Pickett, C. L. Genzale, G. Bruneaux, and L. Malbec, Comparison of Diesel Spray Combustion in Different High-Temperature, High-Pressure Facilities

D. Siebers, Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization, SAE Technical Paper

N. Maes, N. Dam, B. Somers, and B. Lucchini, Experimental and numerical analyses of liquid and spray penetration under heavy-duty diesel engine conditions, SAE Int. J. Fuels Lubr, vol.9, issue.1, pp.108-124, 2016.

W. H. Nurick, Orifice cavitation and its effect on spray mixing, J. Fluids Eng, vol.98, pp.681-687, 1976.

D. Han and M. G. , Direct measurement of entrainment in reacting/nonreacting turbulent jets, Combust. Flame, vol.124, pp.370-386, 2001.

L. M. Pickett and D. L. Siebers, Soot in diesel fuel jets: effects of ambient temperature, ambient density, and injection pressure, Combust. Flame, vol.138, pp.114-135, 2004.

J. M. García-oliver, L. M. Malbec, H. Baya-toda, and G. Bruneaux, A study on the interaction between local flow and flame structure for mixing-controlled Diesel sprays, Combust. Flame, vol.179, pp.157-171, 2017.

N. Maes, M. Hooglugt, N. Dam, and B. Somers, On the influence of wall distance and geometry for high-pressure n-dodecane spray flames in a constant-volume chamber, Int. J. Engine Res, 2019.

L. M. Pickett, Low flame temperature limits for mixing-controlled Diesel combustion, Proc. Combust. Inst, vol.30, pp.2727-2735, 2005.

B. Knox, C. Genzale, L. Pickett, and J. Garcia-oliver, Combustion Recession after End of Injection in Diesel Sprays, SAE Technical Paper

S. A. Skeen and K. Yasutomi, Measuring the soot onset temperature in high-pressure ndodecane spray pyrolysis, Combust. Flame, vol.188, pp.483-487, 2018.

L. M. Pickett and D. L. Siebers, Soot formation in diesel fuel jets near the lift-off length, Int. J. Engine Res, vol.7, pp.103-130, 2006.

N. Maes, Applied Thermal Engineering, vol.172, p.115136, 2020.