S. Duval, R. Antano-lopez, C. Scomparin, M. Jerome, and F. , Hydrogen permeation through ARMCO iron membranes in sour media, NACE Conf. Series, p.4740, 2004.

M. Kimura, N. Totsuka, T. Kurisu, T. Hane, and Y. Nakai, Effect of environmental factors on hydrogen permeation in line pipe steel, Corrosion, vol.44, issue.10, pp.738-744, 1988.

H. Asahi, M. Ueno, and T. Yonezawa, Prediction of sulfide stress cracking in high-strength tubulars, Corrosion, vol.50, issue.7, pp.537-545, 1994.

S. U. Koh, J. S. Kim, B. Y. Yang, and K. Y. Kim, Effect of line pipe steel microstructure on susceptibility to sulfide stress cracking, Corrosion, vol.60, issue.3, pp.244-253, 2004.

S. U. Koh, B. Y. Yang, and K. Y. Kim, Effect of alloying elements on the susceptibility to sulfide stress cracking of line pipe steels, vol.60, pp.262-274, 2004.

G. T. Park, S. U. Koh, K. Y. Kim, and H. G. Jung, Effect of steel microstructure on hydrogen permeation behavior and the determination of critical hydrogen flux for hydrogen embrittlement, Corrosion 2006, NACE Conf. Series, paper n°06438, 2006.

J. Marsh, Comparing hydrogen permeation rates, corrosion rates and sulphide stress cracking resistance for C-110 and P-110 casing steel, Corrosion 2007, NACE Conf. Series, paper n°07109, 2007.

C. Mendez, I. Martinez, L. Melian, and J. Vera, Application of hydrogen permeation for monitoring sulfide stress cracking susceptibility, Corrosion 2002, NACE Conf. Series, paper n°02342, 2002.

J. R. Vera, R. Case, and A. Castro, The relationship between hytdrogen permeation and sulfide stress cracking susceptibility of OCTG materials at different temperatures and pH values, NACE Confer. Series, p.97047, 1997.

T. Boellinghaus, H. Hoffmeister, K. Klemme, and H. Alzer, Hydrogen permeation in a low carbon martensitic stainless steel exposed to H 2 S containing brines at free corrosion, Corrosion 1999, NACE Conf. Series, paper n°99609, 1999.

T. Boellinghaus and H. Hoffmeister, hydrogen permeation in supermartensitic stainless steels dependent on heat treatment and chemical composition, Corrosion 2000, NACE Conf. Series, paper n°00141, 2000.

M. R. Bonis and J. Crolet, Permeation measurments on thin steel membranes, Corrosion 2002, NACE Conf. Series, paper n°02036, 2002.

F. W. Dean and D. J. Fray, Ultrasensitive technique for detection of hydrogen emanating from steel and other solid surfaces, Materials Sci. and Technol, vol.16, pp.41-46, 2000.

A. D. Ethridge, E. B. Mcdonald, D. G. Serate, and F. W. Dean, Examples of use and interpretation of field data using a portable hydrogen permeation monitor, NACE Conf. Series, p.4477, 2004.

F. W. Dean and S. W. Powell, Hydrogen flux and high temperature acid corrosion, Corrosion 2006, NACE Conf. Series, paper n°06436, 2006.

F. W. Dean, M. J. Caroll, and P. A. Nutty, Hydrogen permeation flux data correlation with in-line corrosion monitoring techniques mapped over location and time, NACE Conf. Series, paper n°01636, 2001.

R. D. Tems and F. W. Dean, Filed application of a new, portable, non-intrusive hydrogen monitor for sour service, Corrosion 2000, NACE Conf. Series, paper n°00471, 2000.

F. W. Dean and S. W. Powell, A laboratory study of types of corrosion inducing hydrogen permeation through steel, Corrosion 2004, NACE Conf. Series, paper n°04472, 2004.

F. W. Dean, Measurement of hydrogen permeation through structural steel sections of varying thickness at 19 degrees C, Materials Science and Technology, vol.21, issue.3, pp.347-351, 2005.

S. J. Mishael, F. W. Dean, and C. M. Fowler, Practical applications of hydrogen permeation monitoring, Corrosion 2004, NACE Conf. Series, paper n°04476, 2004.

J. Crolet and G. Maisonneuve, Construction of a universal scale of severity for hydrogen cracking, Corrosion 2000, NACE Conf. Series, paper n°00127, 2000.

J. Crolet and M. R. Bonis, Revisiting hydrogen in steel, part I: theoretical aspects of charging, stress cracking and permeation, NACE Conf. Series, paper n°01067, 2001.

J. Crolet and M. R. Bonis, Revisiting hydrogen in steel, part II: experimental verifications, Corrosion 2001, NACE Conf. Series, paper n°01072, 2001.

M. A. Devanathan and Z. Stachurski, The mechanism of hydrogen evolution on iron in acid solutions by determination of permeation rates, J. Electrochemical Soc, vol.111, issue.5, pp.619-623, 1964.

P. Manolatos and M. Jerome, A thin palladium coating on iron for hydrogen permeation studies, Electrochimica Acta, vol.41, issue.3, pp.359-365, 1996.

P. Manolatos, M. Jerome, and J. Galland, Necessity of A Palladium Coating to Ensure Hydrogen Oxidation During Electrochemical Permeation Measurements on Iron, Electrochimica Acta, vol.40, issue.7, pp.867-871, 1995.

P. Manolatos, M. Jerome, C. Duret-thual, and J. L. Coze, The electrochemical permeation of hydrogen in steels without palladium coating. Part I: Interpretation difficulties, Corrosion Science, vol.37, issue.11, pp.1773-1783, 1995.

F. W. Dean, T. M. Smeeton, and D. J. Fray, Hydrogen permeation through mild steel in temperature range 20-500 degrees C measured by hydrogen collection method, Materials Sci. and Technol, vol.18, issue.8, pp.851-855, 2002.

R. W. Revie, V. S. Sastri, M. Elboujdaini, R. R. Ramsingh, and Y. Lafrenière, Hydrogen-induced cracking of line pipe steels used in sour service, Corrosion, vol.49, issue.7, pp.531-535, 1993.

, Predicting CO 2 corrosion in the oil and gas industry, EFC publication n°13, The Institute of Materials, 1994.