T. V. Bruno, C. Christensen, and R. T. Hill, History and development of TM0284, Corrosion 1999, NACE Conf. Series, paper n°422, 1999.

T. Hara, H. Asahi, and H. Ogawa, Conditions of hydrogen-induced corrosion occurrence of X65 grade line pipe steels in sour environments, vol.60, pp.1113-1121, 2004.

R. D. Kane and M. S. Cayard, NACE committee report 8X294: review of published litterature on wet H2S cracking, 1999.

S. E. Mahmoud, C. W. Petersen, and R. J. Franco, Overview of hydrogen induced cracking (HIC) of pressure vessels in upstream operations, Corrosion 1991, NACE Conf. Series, paper n°10, 1991.

E. M. Moore, Hydrogen-induced damage in sour, wet crude pipelines, Journal of Petroleum Technology, pp.613-618, 1984.

S. N. Smith and M. W. Joosten, Corrosion of carbon steel by H2S in CO2 containing oilfield environments, Corrosion 2006, NACE Conf. Series, paper n°115, 2006.

L. Smith, An overview of european federation of corrosion documents EFC16 and EFC17, Corrosion 1999, NACE Conf. Series, paper n°423, 1999.

C. Bosch, J. P. Jansen, and T. Herrmann, Fit-for-purpose HIC assessment of large diameter pipes for sour service application, Corrosion 2006, NACE Conf. Series, paper n°124, 2006.

S. Gerit, W. Bruckhoff, G. Schmitt, U. Pankoke, and B. Sadlowsky, Influence of material properties and laboratory test conditions on SOHIC at line pipe carbon steels, Corrosion 1998, NACE Conf. Series, paper n°260, 1998.

T. Hara, H. Asahi, Y. Terada, T. Shigenobu, and H. Ogawa, The condition of HIC occurence of X65 linepipe in wet H2S environments, Corrosion 1999, NACE Conf. Series, paper n°429, 1999.

T. Hermann, C. Bosch, and J. Martin, HIC assessment of low alloy steel line pipe for sour service application -Literature survey, 3R International, vol.44, pp.409-417, 2005.

J. Kittel, J. W. Martin, T. Cassagne, and C. Bosch, Hydrogen induced cracking (HIC) -Laboratory testing assessment of low alloy steel linepipe, Corrosion 2008, NACE Conf. Series, paper n°110, 2008.

R. W. Revie, V. S. Sastri, G. R. Hoey, R. R. Ramsingh, D. K. Mak et al., Hydrogen-Induced Cracking of Linepipe Steels .1. Threshold Hydrogen Concentration and pH, vol.49, pp.17-23, 1993.

R. W. Revie, V. S. Sastri, M. Elboujdaini, R. R. Ramsingh, and Y. Lafrenière, Hydrogeninduced cracking of line pipe steels used in sour service, Corrosion, vol.49, issue.7, pp.531-535, 1993.

G. P. Tiwari, A. Bose, J. K. Chakravartty, S. L. Wadekar, M. K. Totlani et al., A study of internal hydrogen embrittlement of steels, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol.286, issue.2, pp.269-281, 2000.

H. Asahi, M. Ueno, and T. Yonezawa, Prediction of sulfide stress cracking in high-strength tubulars, Corrosion, vol.50, issue.7, pp.537-545, 1994.

S. U. Koh, J. S. Kim, B. Y. Yang, and K. Y. Kim, Effect of line pipe steel microstructure on susceptibility to sulfide stress cracking, Corrosion, vol.60, issue.3, pp.244-253, 2004.

J. Leyer, P. Sutter, H. Marchebois, C. Bosch, A. Kulgemeyer et al., SSC resistance of a 125 KSI steel grade in slightly sour environments, Corrosion 2005, NACE Conf. Series, paper n°88, 2005.

C. M. Liao and J. L. Lee, Effect of Molybdenum on Sulfide Stress Cracking Resistance of Low-Alloy Steels, Corrosion, vol.50, issue.9, pp.695-704, 1994.

J. Marsh, Comparing hydrogen permeation rates, corrosion rates and sulphide stress cracking resistance for C-110 and P-110 casing steel, Corrosion 2007, NACE Conf. Series, paper n°109, 2007.

C. Mendez, I. Martinez, L. Melian, and J. Vera, Application of hydrogen permeation for monitoring sulfide stress cracking susceptibility, Corrosion 2002, NACE Conf. Series, paper n°342, 2002.

J. Mougin, M. S. Cayard, R. D. Kane, B. Ghys, and C. Pichard, Sulfide stress cracking and corrosion fatigue of steels dedicated to bottom hole assembly components, Corrosion 2005, NACE Conf. Series, paper n°85, 2005.

K. E. Szklarz, Sulfide stress cracking of a pipeline weld in sour gas service, Corrosion 1999, NACE Conf. Series, paper n°428, 1999.

L. W. Tsay, Y. C. Chen, and S. L. Chan, Sulfide stress corrosion cracking and fatigue crack growth of welded TMCP API 5L X65 pipe-line steel, International Journal of Fatigue, vol.23, issue.2, pp.103-113, 2001.

C. Azevedo, P. S. Bezerra, F. Esteves, C. J. Joia, and O. R. Mattos, Hydrogen permeation studied by electrochemical techniques, Electrochimica Acta, vol.44, issue.24, pp.4431-4442, 1999.

P. Bruzzoni, R. M. Carranza, J. R. Lacoste, and E. A. Crespo, Hydrogen diffusion in alphairon studied using an electrochemical permeation transfer function, Electrochimica Acta, vol.44, issue.16, pp.2693-2704, 1999.

L. Coudreuse and J. Charles, The use of a permeation technique to predict critical concentration of H 2 for cracking, Corrosion Science, vol.27, pp.1169-1181, 1987.

M. A. Devanathan and Z. Stachurski, The mechanism of hydrogen evolution on iron in acid solutions by determination of permeation rates, Journal of the Electrochemical Society, vol.111, issue.5, pp.619-623, 1964.

C. Gabrielli, G. Maurin, L. Mirkova, and H. Perrot, Transfer function analysis of hydrogen permeation through a metallic membrane in a Devanathan cell -Part II: Experimental investigation on iron membrane, Journal of Electroanalytical Chemistry, vol.590, issue.1, pp.15-25, 2006.

M. Kimura, N. Totsuka, T. Kurisu, T. Hane, and Y. Nakai, Effect of environmental factors on hydrogen permeation in line pipe steel, vol.44, pp.738-744, 1988.

E. Lunarska, Y. Ososkov, and Y. Jagodzinsky, Correlation between critical hydrogen concentration and hydrogen damage of pipeline steel, International Journal of Hydrogen Energy, vol.22, pp.279-284, 1997.

G. T. Park, S. U. Koh, K. Y. Kim, and H. G. Jung, Effect of steel microstructure on hydrogen permeation behavior and the determination of critical hydrogen flux for hydrogen embrittlement, Corrosion 2006, NACE Conf. Series, paper n°438, 2006.

J. R. Vera, R. Case, and A. Castro, The relationship between hydrogen permeation and sulfide stress cracking susceptibility of OCTG materials at different temperatures and pH values, Corrosion 1997, NACE Conf. Series, paper n°47, 1997.

S. Duval, R. Antano-lopez, C. Scomparin, M. Jerome, and F. Ropital, Hydrogen permeation through ARMCO iron membranes in sour media, Corrosion 2004, NACE Conf. Series, paper n°740, 2004.

S. U. Koh, B. Y. Yang, and K. Y. Kim, Effect of alloying elements on the susceptibility to sulfide stress cracking of line pipe steels, Corrosion, vol.60, issue.3, pp.262-274, 2004.

T. Boellinghaus, H. Hoffmeister, J. Klemme, and H. Alzer, Hydrogen permeation in a low carbon martensitic stainless steel exposed to H2S containing brines at free corrosion, Corrosion 1999, NACE Conf. Series, paper n°609, 1999.

T. Boellinghaus and H. Hoffmeister, hydrogen permeation in supermartensitic stainless steels dependent on heat treatment and chemical composition, Corrosion 2000, NACE Conf. Series, paper n°141, 2000.

M. R. Bonis and J. L. Crolet, Permeation measurments on thin steel membranes, Corrosion 2002, NACE Conf. Series, paper n°36, 2002.

F. W. Dean and D. J. Fray, Ultrasensitive technique for detection of hydrogen emanating from steel and other solid surfaces, Materials Science and Technology, vol.16, pp.41-46, 2000.

F. W. Dean and S. W. Powell, hydrogen flux and high temperature acid corrosion, Corrosion 2006, NACE Conf. Series, paper n°436, 2006.

A. D. Ethridge, E. B. Mcdonald, D. G. Serate, and F. W. Dean, Examples of use and interpretation of field data using a portable hydrogen permeation monitor, NACE Conf. Series, p.477, 2004.

F. W. Dean, M. J. Caroll, and P. A. Nutty, Hydrogen permeation flux data correlation with inline corrosion monitoring techniques mapped over location and time, NACE Conf. Series, paper n°636, 2001.

R. D. Tems and F. W. Dean, Filed application of a new, portable, non-intrusive hydrogen monitor for sour service, Corrosion 2000, NACE Conf. Series, paper n°471, 2000.

F. W. Dean and S. W. Powell, A laboratory study of types of corrosion inducing hydrogen permeation through steel, Corrosion 2004, NACE Conf. Series, paper n°472, 2004.

F. W. Dean, Measurement of hydrogen permeation through structural steel sections of varying thickness at 19 degrees C, Materials Science and Technology, vol.21, issue.3, pp.347-351, 2005.

S. J. Mishael, F. W. Dean, and C. M. Fowler, Practical applications of hydrogen permeation monitoring, Corrosion 2004, NACE Conf. Series, paper n°476, 2004.

J. O. Bockris, J. Mcbreen, and L. Nanis, The hydrogen evolution kinetics and hydrogen entry into a-iron, Journal of the Electrochemical Society, vol.112, issue.10, pp.1025-1031, 1965.

R. N. Iyer, H. W. Pickering, and M. Zamanzadeh, Analysis of hydrogen evolution and entry into metals for the discharge-recombination process, Journal of the Electrochemical Society, vol.136, issue.9, pp.2463-2470, 1989.

R. N. Iyer, I. Takeuchi, M. Zamanzadeh, and H. W. Pickering, Hydrogen sulfide effect on hydrogen entry into iron -A mechanistic study, vol.46, pp.460-468, 1990.

P. Marcus, Corrosion Mechanisms in Theory and in Practice, chapter n°3, vol.2, pp.53-96, 2002.

, Standard practice for evaluation of hydrogen uptake, permeation, and transport in metals by an electrochemical technique, ASTM G148-97 (revised 2003)

J. Crank, The mathematics of diffusion, 1975.

J. L. Crolet and G. Maisonneuve, Construction of a universal scale of severity for hydrogen cracking, Corrosion 2000, NACE Conf. Series, paper n°127, 2000.

J. L. Crolet and M. R. Bonis, Revisiting hydrogen in steel, part I: theoretical aspects of charging, stress cracking and permeation, NACE Conf. Series, paper n°67, 2001.

J. L. Crolet and M. R. Bonis, Revisiting hydrogen in steel, part II: experimental verifications, Corrosion 2001, NACE Conf. Series, paper n°72, 2001.

. Efc-publication-n°16, Guidelines on materials requirements for carbon and low alloy steels for H 2 S-containing environments in Oil and Gas production, The Institute of Materials, 1995.

P. Manolatos and M. Jerome, A thin palladium coating on iron for hydrogen permeation studies, Electrochimica Acta, vol.41, issue.3, pp.359-365, 1996.

P. Manolatos, M. Jerome, C. Duret-thual, and J. Le-coze, The electrochemical permeation of hydrogen in steels without palladium coating. Part I: Interpretation difficulties, Corrosion Science, vol.37, issue.11, pp.1773-1783, 1995.

P. Manolatos, M. Jerome, and J. Galland, Necessity of a palladium coating to ensure hydrogen oxidation during electrochemical permeation measurements on iron, Electrochimica Acta, vol.40, issue.7, pp.867-871, 1995.

M. A. Veloz and I. Gonzalez, Electrochemical study of carbon steel corrosion in buffered acetic acid solutions with chlorides and H 2 S, Electrochimica Acta, vol.48, issue.2, pp.135-144, 2002.

F. W. Dean, T. M. Smeeton, and D. J. Fray, Hydrogen permeation through mild steel in temperature range 20-500°C measured by hydrogen collection method, Materials Science and Technology, vol.18, issue.8, pp.851-855, 2002.

, Predicting CO 2 corrosion in the oil & gas industry, The Institute of Materials, 1994.