D. Sabathil, A. Koenigstein, P. Schaffner, J. Fritzsche, and A. Doehler, The influence of DISI engine operating parameters on particle number emissions, SAE Technical Paper, 2011.

R. Close, Soot particles from GDI engines: Particle alert for direct-injection gasoline cars, 2017.

M. S. Peckham, A. Finch, B. Campbell, P. P. Davies, and M. T. , Study of particle number emissions from a turbocharged gasoline direct injection (GDI) engine including data from a fast-response particle size spectrometer, 2011.

Y. Zhang, J. Ghandhi, and D. Rothamer, Comparisons of particle size distribution from conventional and advanced compression ignition combustion strategies, International Journal of Engine Research, p.1468087417721089, 2016.

, Regulation (EC) No 715/2007 of the European Parliament and of the Council and Commission Regulation (EC) No 692/2008 as regards emissions from light passenger and commercial vehicles, vol.459, 2012.

B. Giechaskiel, U. Manfredi, and G. Martini, Engine exhaust solid sub-23 nm particles: I. Literature survey, SAE International Journal of Fuels and Lubricants, vol.7, pp.950-964, 2014.
DOI : 10.4271/2014-01-2834

F. Leach, R. Stone, and D. Richardson, Particulate emissions from a highly boosted gasoline direct injection engine, International Journal of Engine Research, vol.19, pp.347-359, 2018.
DOI : 10.1177/1468087417710583

J. O. Anderson, J. G. Thundiyil, and A. Stolbach, Clearing the air: a review of the effects of particulate matter air pollution on human health, Journal of Medical Toxicology, vol.8, pp.166-175, 2012.

Y. Otsuki, S. Tochino, K. Kondo, and K. Haruta, Portable Emissions Measurement System for Solid Particle Number Including Nanoparticles Smaller than 23 nm, SAE Technical Paper, 2017.
DOI : 10.4271/2017-01-2402

Q. Jiao and R. D. Reitz, The effect of operating parameters on soot emissions in GDI engines, SAE International Journal of Engines, vol.8, pp.1322-1333, 2015.

, Investigation of particle formation processes in a GDI engine in catalyst heating operation, 2011.

A. Lewis, S. Akehurst, and J. Turner, Particulate emissions from a highly boosted gasoline direct injection engine, International Journal of Engine Research, vol.19, pp.347-359, 2018.

G. Pilla, L. Franqueville, and . De, Investigation of particle formation mechanisms in GDI engines during transient heating operation, SIA, 2013.

K. Reavell, T. Hands, and N. Collings, A Fast Response Particulate Spectrometer for Combustion Aerosols, 2002.
DOI : 10.4271/2002-01-2714

A. Gaydon, The spectroscopy of flames, 2012.

D. Maligne and G. Bruneaux, Time-Resolved Fuel Film Thickness Measurement for Direct Injection SI Engines Using Refractive Index Matching, 2011.
DOI : 10.4271/2011-01-1215

H. Yang, D. Greszik, T. Dreier, and C. Schulz, Simultaneous measurement of liquid water film thickness and vapor temperature using near-infrared tunable diode laser spectroscopy, Applied Physics B, vol.99, pp.385-390, 2010.
DOI : 10.1007/s00340-010-3980-3

F. Schulz, J. Schmidt, and F. Beyrau, Development of a sensitive experimental set-up for LIF fuel wall film measurements in a pressure vessel, Experiments in Fluids, vol.56, p.98, 2015.

C. Schulz and V. Sick, Tracer-LIF diagnostics: quantitative measurement of fuel concentration, temperature and fuel/air ratio in practical combustion systems, Progress in Energy and Combustion Science, vol.31, pp.75-121, 2005.

X. Ma, X. He, J. Wang, and S. Shuai, Design and Optimization of Multi-component Fuel for Fuel Concentration Measurement by Using Tracer PLIF in SI Engine, SAE Technical Paper, 2010.

L. M. Itani, G. Bruneaux, D. Lella, A. Schulz, and C. , Two-tracer LIF imaging of preferential evaporation of multi-component gasoline fuel sprays under engine conditions, Proceedings of the Combustion Institute, vol.35, pp.2915-2922, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01121161

W. Moore, M. Foster, M. Lai, X. Xie, Z. et al., Charge Motion Benefits of Valve Deactivation to Reduce Fuel Consumption and Emissions in a GDi, VVA Engine, 2011.

A. Selamet, S. Rupal, Y. He, and P. S. Keller, An Experimental Study on the Effect of Intake Primary Runner Blockages on Combustion and Emissions in SI Engines under Part-Load Conditions, 2004.

H. Dageförde, A. Kiefer, W. Samenfink, W. Wiese, and A. Kufferath, Requirements for spray and tip design of a multi-hole injector for DISI engines, Proceedings of ICLASS, 2015.

C. Habchi, A comprehensive model for liquid film boiling in internal combustion engines. Oil & Gas Science and Technology-Revue de l, Institut Français du Pétrole, vol.65, pp.331-343, 2010.
DOI : 10.2516/ogst/2009062
URL : https://hal.archives-ouvertes.fr/hal-01937527

S. Kook, R. Zhang, K. Szeto, L. M. Pickett, and T. Aizawa, Flame Soot Sampling and Particle Analysis in a Diesel Engine, vol.6, pp.80-97, 2013.
DOI : 10.4271/2013-01-0912