G. Borman and K. Nishiwaki, Internal-combustion engine heat transfer, Progress in Energy and Combustion Science, vol.13, issue.1, 1987.
DOI : 10.1016/0360-1285(87)90005-0

M. Jia, E. Gingrich, H. Wang, Y. Li, J. B. Ghandhi et al., Effect of combustion regime on in-cylinder heat transfer in internal combustion engines, International Journal of Engine Research, vol.17, issue.3, pp.331-346, 2016.

Y. Miyairi, Computer Simulation of an LHR DI Diesel Engine, SAE Technical Paper, vol.880187, 1988.
DOI : 10.4271/880187

A. N. Pawar, J. Bn, and M. R. Nandgaonkar, Combustion analysis and performance of low heat rejection diesel engine with different thermal insulation coating, SAE Technical Paper, 2004.
DOI : 10.4271/2004-28-0012

P. Tamilporai, N. Baluswamy, and P. M. Jawahar, Simulation and Analysis of Combustion and Heat Transfer in Low Heat Rejection Diesel Engine Using Two Zone Combustion Model and Different Heat Transfer Models, SAE Technical Paper, 2003.

D. D. Anderson, The Effects of Ceramic Port Insulation on Cylinder Head Performance in a Diesel Engine, SAE Technical Paper, 1996.

D. Saad, P. Saad, and L. Kamo, Thermal Barrier Coatings for High Output Turbocharged Diesel Engine, SAE Technical Paper, 2007.
DOI : 10.4271/2007-01-1442

J. F. Tovell, The Reduction of Heat Losses to the Diesel Engine Cooling System, SAE Technical Paper, vol.830316, 1983.

E. M. Afify and D. E. Klett, The Effect of Selective Insulation on the Performance, Combustion, and NO Emissions of a DI Diesel Engine, SAE Technical Paper, 1996.

T. Morel, E. F. Fort, and P. N. Blumberg, Effect of Insulation Strategy and Design Parameters on Diesel Engine Heat Rejection and Performance, SAE Technical Paper, vol.850506, 1985.
DOI : 10.4271/850506

T. Morel, R. Keribar, and P. N. Blumberg, Examination of Key Issues in Low Heat Rejection Engines, SAE Technical Paper, vol.860316, 1986.

R. H. Thring, Low Heat Rejection Engines, SAE Technical Paper, vol.860314, 1986.
DOI : 10.4271/860314

D. W. Dickey, The Effect of Insulated Combustion Chamber Surfaces on Direct-Injected Diesel Engine Performance, Emissions and Combustion, SAE Technical Paper, vol.890292, 1989.

T. Morel, S. Wahiduzzaman, and E. F. Fort, Heat Transfer Experiments in an Insulated Diesel, SAE Technical Paper, vol.880186, 1988.
DOI : 10.4271/880186

C. Binder, A. Nada, F. Richter, and M. , Heat Loss Analysis of a Steel Piston and a YSZ Coated Piston in a Heavy-Duty Diesel Engine Using Phosphor Thermometry Measurements, SAE Int J Engines, vol.10, issue.4, 2017.

S. Caputo, F. Millo, and G. Cifali, Numerical Investigation on the Effects of Different Thermal Insulation Strategies for a Passenger Car Diesel Engine, SAE Int J Engines, vol.10, issue.4, 2017.

A. Kawaguchi, H. Iguma, and H. Yamashita, Thermo-Swing Wall Insulation Technology; -A Novel Heat Loss Reduction Approach on Engine Combustion Chamber, SAE Technical Paper, 2016.
DOI : 10.4271/2016-01-2333

K. Fukui, Y. Wakisaka, and N. Nishikawa, Development of Instantaneous Temperature Measurement Technique for Combustion Chamber Surface and Verification of Temperature Swing Concept, SAE Technical Paper, 2016.

A. Kawaguchi, H. Iguma, and H. Yamashita, Engine Heat Loss Reduction by Thermo-Swing Wall Insulation Technology: Mechanism Analysis and Effect on Low Temperature Starting, The Ninth International Conference on Modeling and Diagnostics for Advanced Engine Systems, 2017.

J. Okayama,

H. Kosaka, Y. Wakisaka, and Y. Nomura, Concept of "Temperature Swing Heat Insulation" in Combustion Chamber Walls, and Appropriate Thermo-Physical Properties for Heat Insulation Coat, SAE Int J Engines, vol.6, issue.1, pp.142-149, 2013.

Y. Wakisaka, M. Inayoshi, and K. Fukui, Reduction of Heat Loss and Improvement of Thermal Efficiency by Application of "Temperature Swing" Insulation to Direct-Injection Diesel Engines, SAE Int J Engines, vol.9, issue.3, 2016.

K. Uchihara, M. Ishii, and H. Nakajima, A Study on Reducing Cooling loss in a Partially Insulated Piston for Diesel Engine, SAE Technical Paper, 2018.

H. Osada, H. Watanabe, and Y. Onozowa, Experimental Analysis of Heat-Loss with Different Piston Wall Surface Conditions in a Heavy-Duty Diesel Engine, The Ninth International Conference on Modeling and Diagnostics for Advanced Engine Systems, 2017.

N. Uchida and H. Osada, A New Piston Insulation Concept for Heavy-Duty Diesel Engines to Reduce Heat Loss from the Wall, SAE Int J Engines, vol.10, issue.5, 2017.

J. R. Serrano, F. J. Arnau, and J. Martin, Analysis of Engine Walls Thermal Insulation: Performance and Emissions, SAE Technical Paper, 2015.

H. Fujimoto, H. Yamamoto, and M. Fujimoto, A Study on Improvement of Indicated Thermal Efficiency of ICE Using High Compression Ratio and Reduction of Cooling Loss, SAE Technical Paper, 2011.

D. Paola, G. Rabeau, F. Knop, V. Willems, and W. , Modelling investigation of design approaches for Low Heat Rejection Diesel Engines, SIA Powertrain, 2016.

G. Cicalese, F. Berni, and S. Fontanesi, A Comprehensive CFD-CHT Methodology for the Characterization of a Diesel Engine: from the Heat Transfer Prediction to the Thermal Field Evaluation, SAE Technical Paper, 2017.

P. Kundu, R. Scarcelli, and S. Som, Modeling Heat Loss through Pistons and Effect of Thermal Boundary Coatings in Diesel Engine Simulations using a Conjugate Heat Transfer Model, SAE Technical Paper, 2016.

M. Leguille, F. Ravet, L. Moine, and J. , Coupled FluidSolid Simulation for the Prediction of Gas-Exposed Surface Temperature Distribution in a SI Engine, SAE Technical Paper, 2017.

P. Senecal, K. Richards, E. Pomraning, T. Yang, . Dai et al., A New Parallel Cut-Cell Cartesian CFD Code for Rapid Grid Generation Applied to In-Cylinder Diesel Engine Simulations, SAE Technical Paper, pp.2007-2008, 2007.

C. O. Benkenida and A. , The 3-zones extended coherent flame model (ecfm3z) for computing premixed/diffusion combustion, Oil & Gas Science and Technology, vol.59, issue.6, pp.593-609, 2004.
URL : https://hal.archives-ouvertes.fr/hal-02017326

O. Colin, A. Benkenida, and C. Angelberger, 3D Modeling of Mixing, Ignition and Combustion Phenomena in Highly Stratified Gasoline Engines, Oil & Gas Science and Technology, vol.58, issue.1, pp.47-62, 2003.
URL : https://hal.archives-ouvertes.fr/hal-02043831

V. Knop, J. B. Michel, and C. O. , On the use of a tabulation approach to model auto-ignition during flame propagation in SI engines, Applied Energy, vol.88, issue.12, pp.4968-4979, 2011.

O. Colin, P. Da, C. A. , and J. S. , Detailed chemistry-based auto-ignition model including low temperature phenomena applied to 3-D engine calculations, Proceedings of the Combustion Institute, vol.30, issue.2, pp.2649-2656, 2005.

H. J. Curran, P. Gaffuri, and W. J. Pitz, A Comprehensive Modeling Study of n-Heptane Oxidation, Combustion and Flame, vol.114, issue.1-2, pp.282-286, 1998.

J. Bohbot, O. Colin, and A. Velghe, An Innovative Approach Combining Adaptive Mesh Refinement, the ECFM3Z Turbulent Combustion Model, and the TKI Tabulated Auto-Ignition Model for Diesel engine CFD Simulations, SAE Technical Paper, 2016.

H. Hiroyasu and T. Kadota, Models for Combustion and Formation of Nitric Oxide and Soot in Direct Injection Diesel Engines, SAE Technical Paper, vol.760129, 1976.

Y. Zeldovitch, P. Sadovnikov, and F. Da, Oxidation of Nitrogen in Combustion: translated by M. Shelef. Academy of Science of USSR, 1947.

B. E. Launder and D. B. Spalding, The numerical computation of turbulent flows, Computer Methods in Applied Mechanics and Engineering, vol.3, issue.2, pp.90029-90031, 1974.

A. A. Amsden, KIVA-3V: A Block-Structured KIVA Program for Engines with Vertical or Canted Valves, 1997.
DOI : 10.2172/505339

R. D. Reitz and R. Diwakar, Structure of High-Pressure Fuel Sprays, SAE Technical Paper, vol.870598, 1987.

P. J. O'rourke and A. A. Amsden, A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model, SAE Technical Paper, 2000.

T. Kogo, Y. Hamamura, and K. Nakatani, High Efficiency Diesel Engine with Low Heat Loss Combustion ConceptToyota's Inline 4-Cylinder 2.8-Liter ESTEC 1GD-FTV Engine, SAE Technical Paper, 2016.
DOI : 10.4271/2016-01-0658

P. Andruskiewicz, P. Najt, and R. Durrett, Analysis of the effects of wall temperature swing on reciprocating internal combustion engine processes, International Journal of Engine Research, vol.19, issue.4, pp.461-473, 2018.