J. Agar, N. Morgenstern, and J. Scott, Shear Strength and Stress-Strain Behaviour of Athabasca Oil Sand at Elevated Temperatures and Pressures, Can. Geotech. J, vol.24, pp.1-10, 1987.

S. Betata, Les écoulements polyphasiques aux abords des puits dans les gisements d'hydrocarbures, 1998.

R. Bora, B. Maini, and A. Chakma, Flow Visualization Studies of Solution Gas Drive Process in Heavy Oil Reservoirs Using a Glass Micromodel, 1997.

P. Cerasi, Étude de la croissance d'une instabilité d'érosion dans un milieu poreux non consolidé. Application à l'angiogenèse, 1996.

E. Claridge and M. Prats, A Proposed Model and Mechanism for Anomalous Foamy Heavy Oil Behavior, 1995.

D. Coombe and B. Maini, Workshop on Foamy Oil Flow Held at the Petroleum Recovery Institute, 1994.

M. Dusseault and N. Et-morgenstern, Shear Strength of Athabasca Oil Sands, Can. Geotech. J, vol.15, pp.216-238, 1978.

M. Dusseault and H. Van-domselaar, Unconsolidated Sand Sampling in Canadian and Venezuelan Oil Sands, 1982.

M. Dusseault, Cold Production and Enhanced Oil Recovery, JCPT, vol.32, p.9, 1993.

M. Dusseault, M. Geilikman, and W. Et-roggensack, Practical Requirements for Sand Production Implementation in Heavy Oil, 1995.

M. Dusseault, M. Geilickman, and T. Spanos, Mechanisms of Sand Production, vol.27343, 1998.

M. Dusseault, . Trinidad, . Tobago, and . Conf, Canadian Heavy Oil Production Experience Using Cold Production, 1998.

L. Elkins, D. Morton, and W. Blackwell, Experimental Fireflood in a Very Viscous Oil-Consolidated Sand Reservoir, 1972.

A. Firoozabadi, M. Pooladi-darvish, and V. Eleri, Gas and Liquid Mobilities in Cold Production of Heavy Oil Reservoirs, 1997.

. Firoozabadi, Solution Gas Drive in Heavy Oil Reservoirs, pp.97-113, 1997.

M. Geilikman, M. Dusseault, and F. Et-dullien, Fluid Production Enhancement by Exploiting Sand Production, p.27797, 1994.

M. Geilikman, M. Dusseault, and F. Et-dullien, Sand Production as a Viscoplastic Granular Flow, 1994.

M. Geilikman, M. Dusseault, and F. Et-dullien, FluidSaturated Solid Flow with Propagation of a Yielding Front, Eurock ', vol.94, 1994.

M. Geilikman, M. Dusseault, and F. Et-dullien, Sand Production and Yield Propagation around Wellbores, pp.94-89, 1994.

M. Geilikman, M. Dusseault, and F. Et-dullien, Dynamic Effects of Foamy Fluid Flow in Sand Production Instability, p.30251, 1995.

M. Geilikman, M. Dusseault, and F. Et-dullien, Fluid Rate in Flowing Granular Medium with Moving Boundary, 1995.

M. Geilikman, F. Dullien, and M. Dusseault, Erosional Creep of Fluid-Saturated Granular Medium, J. of Eng. Mech, 1997.

M. Geilikman and M. Dusseault, Dynamics of Wormholes and Enhancement of Fluid Production. 48th Annual Technical Meeting of the Petroleum Society in Calgary, 1997.

R. Gonzalez and C. Brunings, Influence of Increased Pump Frequency in the Production of the Orinoco Belt Foamy Extra Heavy Crude Oil, ESP Workshop, 1996.

. B. Huang, B. Marcum, M. Chase, and C. Yu, Cold Production of Heavy Oil From Horizontal Wells in the Frog Lake Field, 1997.

M. Huerta, C. Otero, A. Rico, I. Jimenez, M. Mirabal et al., Understanding Foamy Oil Mechanisms for Heavy Oil Reservoirs during Primary Production, 1996.

S. Karyampudi, Evaluation of Cyclic Steam Performance and Mechanisms in Mobile Heavy Oil Reservoir at Elk Point Thermal Pilot, pp.93-141, 1993.

D. Kashchiev and A. Firoozabadi, Kinetics of the Initial Stage of Isothermal Gas Phase Formation, J. Chem. Phys, vol.98, pp.4690-4699, 1993.

W. Kraus, W. Mccaffrey, and G. Boyd, Pseudo-Bubble Point Model for Foamy Oils, pp.93-138, 1993.

J. Lea, P. Anderson, and D. Anderson, Optimization of Progressive Cavity Pump Systems in the Development of the Clear-Water Heavy Oil Reservoir, pp.87-125, 1987.

J. P. Lebel, Performance Implications of Various Reservoir Access Geometries. 11th Annual Heavy Oil & Oil Sands Symposium, 1994.

D. Loughead and M. Saltuklaroglu, Lloydminster Heavy Oil Production-Why so Unusual? 9th Heavy Oil Symposium, 1992.

B. Maini, H. Sarma, A. George, B. Maini, and H. Sarma, Significance of FoamOil Behaviour in Primary Production of Heavy Oils, Advances in Chem. Series, vol.32, issue.9, pp.405-420, 1993.

B. Maini, Laboratory Investigation of Foamy Oil Flow for Improved Primary Production, 1995.

B. Maini, Foamy Oil Flow in Heavy Oil Production, JCPT, vol.35, pp.21-24, 1996.

M. Metwally and S. Solanki, Heavy Oil Reservoir Mechanisms, Lindbergh and Frog Lake Fields, Alberta-Part I: Field Observations and Reservoir Simulation, pp.95-63, 1995.

M. Metwally, Pressure Cycling Process for Depleted Heavy Oil Reservoirs, pp.96-68, 1996.

M. Mirabal and . De, Integrated Study for the Characterization and Development of the MFB-53 Reservoir, 1996.

M. Mirabal and . De, Impact of Foamy Oil Mechanism on the Hamaca Oil Reserves Orinoco Belt, 1996.

M. Mirabal, . De, H. Rodriguez, and R. Gordillo, Production Improvement Strategy for Foamy Hamaca Crude Oil: A Field Case, 1997.

A. Monnet, Boulance, érosion interne, renard. Les instabilités sous écoulement. Revue Francaise de Géotechnique, vol.82, pp.3-10, 1998.

J. C. Moulu and D. Et-longeron, Solution Gas Drive: Experiments and Simulation, Eur. Symp. on IOR, 1989.

H. Rodriguez, R. Sliva, L. Zerpa, L. Fung, and M. Camino, Stability Analysis of Horizontal Wells in Orinoco Belt, 1996.

H. Rodriguez, P. Vaca, O. Gonzalez, M. Mirabal, and . De, Integrated Study of a Heavy Oil Reservoir in the Orinoco Belt: a Field Case Simulation, 1997.

H. Sarma and B. Maini, An Experimental Evaluation of Viscosity Grading for Controlling Fingering in Miscible Displacements, JCPT, vol.32, p.1, 1993.

C. Shen and J. Batycky, Some Observations of Mobility Enhancement of Heavy Oils Flowing Through Sand Pack Under Solution Gas Drive, pp.96-123, 1996.

J. Sheng, R. Hayes, W. Tortike, and B. Maini, A Proposed Dynamic Model for Foamy Oil Properties, 1995.

J. Sheng, . B. Maini, R. Hayes, and W. Et-tortike, A NonEquilibrium Model to Calculate Foamy Oil Properties, pp.95-114, 1995.

J. Sheng, R. Hayes, B. Maini, and W. Et-tortike, A Dynamic Model to Simulate Foamy Oil Flow in Porous Media, 1996.

J. Sheng, R. Hayes, and B. Maini, Experimental Study of Foamy Oil Stability, JCPT, vol.36, p.4, 1997.

J. Sheng, Foamy Oil Flow in Porous Media, 1997.

G. Smith, Fluid Flow and Sand Production in Heavy Oil Reservoirs Under Solution Gas Drive, SPEPE, vol.3, pp.169-180, 1988.

S. Solanki and M. Metwally, Heavy Oil Reservoir Mechanisms, Lindbergh and Frog Lake Fields, Alberta-Part. II: Geomechanical Evaluation. SPE, vol.30249, 1995.

A. Squires, Inter-Well Tracer Results and Gel Blocking Program. 10th Annual Heavy Oil & Oil Sands Symposium, 1993.

R. Treinen, W. Ring, A. Spence, M. Mirabal, . De et al., Hamaca: Solution Gas Drive Recovery in a Heavy Oil Reservoir, 1997.

B. Tremblay, G. Sedgwick, and K. Forshner, Imaging of Sand Production in Horizontal Packs by X-ray Computer Tomography, 1995.

B. Tremblay, G. Sedgwick, and K. Forshner, Modelling of Sand Production from Wells on Primary Recovery, pp.96-122, 1996.

B. Tremblay, G. Sedgwick, and K. Forshner, Simulation of Cold Production in Heavy Oil Reservoirs: Wormholes Dynamics, vol.35387, 1996.

B. Tremblay, K. Oldakowski, and A. Settari, , 1997.

, Geomechanical Properties of Oil Sands at Low Effective Stress. 48th Annual Technical Meeting of the Petroleum Society

B. Tremblay, G. Sedgwick, and D. Vu, CT Imaging of Wormhole Growth under Solution Gas Drive, 1998.

B. Tremblay, G. Sedgwick, D. Vu, D. Lillico, E. Jossy et al., Cold Production in Heavy Oil Reservoirs. Poster, 15th World Petroleum Congress, 1998.

B. Tremblay, G. Sedgwick, and D. Vu, CT Imaging of Sand Production in a Horizontal Sand Pack Using Live Oil, 49th Annual Technical Meeting of the Petroleum Society, 1998.

H. Vaziri, R. Phillips, and P. Hurley, Physical Modeling of Sand Production, Int. J. Rock Mech. & Min. Sci, vol.34, p.323, 1997.

Y. Wang and M. Dusseault, Response of a Circular Opening in a Friable Low-Permeability Medium to Temperature and Pore Pressure Changes, Int. J. Num. Anal. Meth. Geom, vol.19, pp.157-179, 1995.

Y. Wang and M. Dusseault, Sand Production Potential near Inclined, 1996.

Y. Wang, The Effect of a Nonlinear Mohr-Coulomb Criteria on the Stresses and Plastic Deformation near a Circular Opening in Poorly Consolidated Permeable Medium, Int. J. Rock Mech. & Min. Eng. Geomec. Abs, vol.33, issue.2, pp.197-203, 1996.

L. Xuehai and Y. Et-yortsos, Critical Gaz Saturation: Modelling and Sensitivities Studies, 1993.

J. Yuan, A. Babchin, and B. Tremblay, Modeling Wormhole Flow in Cold Production, 49th Annual Technical Meeting of the Petroleum Society, 1998.

J. Yuan, B. Tremblay, and A. Et-babchin, A Wormhole Network Model of Cold Production in Heavy Oil, vol.54097, 1999.

K. Yeung and M. Et-adamson, Burnt Lake Project-Bitumen Production from the Cold Lake Oil Sands Deposit Without Steam, vol.92, 1992.

K. Yeung, Cold Flow Production of Crude Bitumen at the Burnt Lake Project, Northeastern Alberta. 6th Unitar Conf. Manuscrit définitif reçu en mars, 1995.