M. W. Joosten, New Study Shows How to Predict Accumulated Drillpipe Fatigue. Word Oil, 1985.

B. A. Dale, An Experimental Investigation of FatigueCrack Growth in Drillstring Tubulars, SPE Drilling Engineering, pp.356-362, 1988.

T. H. Hill, A Unified Approach to Drillstem Failure Prevention. SPE Drilling Engineering, 1992.
DOI : 10.2118/22002-pa

J. P. Pitts, Trip Inspection, Testing Gain Favor as Insurance, Drill Bit, p.885

H. P. Lieurade, La pratique des essais de fatigue. Commission Fatigue des métaux de la SFM, 1982.

A. Lubinski, Maximum Permissible Doglegs in Rotary Boreholes, Journal of Petroleum Technology, 1961.

J. E. Hansford and A. Lubinski, Cumulative Fatigue Damage of Drillpipe in Doglegs, Journal of Petroleum Technology, 1966.

A. , Recommended Practice for Drillstem Design and Operating Limits. API-RP-7G, 1998.

J. Wu, Model Predicts Drillpipe Fatigue in Horizontal Wells, Oil and Gas Journal, 1997.

J. S. Shepard, Extended Drillpipe Life with Tighter Specifications. Global Marine Drilling Co, IADC/SPE 23843, 1992.
DOI : 10.2523/23843-ms

J. Wu, Drill-Pipe Bending and Fatigue in Rotary Drilling of Horizontal Wells, SPE, vol.37353, 1996.

, Oil & Gas Science and Technology-Rev. IFP, vol.56, issue.6, 2001.

P. R. Paslay and E. P. Cernocky, Bending Stress Magnification in Constant Curvature Doglegs with Impact on Drillstring and Casing. SPE 22547, 1991.

J. A. Howard, Systematic Tracking of Fatigue and Crack Growth to Optimize Drillstring Reliability. Enertech Engineering and Research Co, SPE/IADC 25775, 1993.
DOI : 10.2523/25775-ms

J. E. Smith, Drillpipe for Horizontal Drilling. SPE 23990, 1992.
DOI : 10.2523/23990-ms

T. H. Hill, Designing and Qualifying Drillstrings for Extended Reach Drilling, SPE/IADC 29349, Drilling Conference, 1995.
DOI : 10.2118/29349-pa

R. Dawson and P. R. Paslay, Drillpipe Buckling in Inclined Holes, Journal of Petroleum Technology, 1984.
DOI : 10.2118/11167-pa

X. He and A. Kylingstad, Helical Buckling and Lock-up Conditions for Coiled Tubing in Curved Wells, SPE Asia-Pacific Oil and Gas Conference, 1993.
DOI : 10.2118/25370-pa

A. Baryshnikov, Downhole Tool Serviceability Under Dynamic Loads. Drilling Conference SPE/IADC, vol.37647, 1997.
DOI : 10.2118/37647-ms

M. K. Rahman, Stress Concentration Incorporated Fatigue Analysis of Die-Marked Drillpipe, International Journal of Fatigue, vol.21, pp.799-811, 1999.
DOI : 10.1016/s0142-1123(99)00039-0

G. Y. Grondin, Fatigue Testing of Drillpipe. SPE Drilling and Completion, 1994.

A. Tafreshi and W. D. Dover, Stress Analysis of Drillstring Threaded Connections Using the Finite Element Method, International Journal Fatigue, vol.15, pp.429-438, 1993.

F. Zeren, Fatigue Limits Analyzed for Drillpipe in a Dogleg, Oil and Gas Journal, 1986.

A. Ertas, The Effect of Tool-Joint Stiffness on Drillpipe Fatigue in Riser Ball Joints, Journal of Engineering for Industry, vol.111, 1989.

A. Ertas, A Comparison of Fracture Mechanics and S-N Curve Approaches in Designing Drillpipe, Journal of Offshore Mechanics and Artic Engineering, vol.114, 1992.

J. C. Placido, Drillpipe Fatigue Life Prediction Model Based on Critical Plane Approaches, OTC, vol.7569, 1994.

W. C. Chen, Drillstring Fatigue Performance. SPE Drilling Engineering, 1990.
DOI : 10.2118/16076-pa

A. Ertas, A Comparison of Fracture Mechanics and S-N Curve Approaches in Designing Drillpipe, Mechanical Engineering Department

E. Kral, Fracture Mechanics Concept Offers Model to Help Calculate Fatigue Life in Drillpipe, Technology, Oil and Gas Journal, p.13, 1984.

J. Lemaître and J. L. Chaboche, Mécanique des matériaux solides, 1996.

T. H. Hill, Qualifying Drillstring Components for Deep Drilling, Journal of Petroleum Technology, pp.1511-1522, 1985.
DOI : 10.2118/12620-pa

T. H. Hill, Standard DS-1, Drillstem Design and Inspection, DEA Project, vol.74, 1998.

J. H. Horbeek, Successful Reduction of North Sea Drillstring Failures, Offshore Europe SPE, vol.30348, pp.5-8, 1995.

R. G. Sweet, Case History of Drillstem Failures Offshore West Africa, Drilling Conference SPE/IADC 18653, 1989.
DOI : 10.2118/18653-pa

J. Kahil, New Technology for the Inspection of Used Tubing and Drillpipe, Eighth International Conference on Offshore Mechanics and Artic Engineering, pp.327-332, 1989.

, API (1999) API Specification 5D, Drillpipe

, API (1997) Recommended Practice for Field Inspection of New Casing, Tubing and Plain End Drillpipe. API-RP-5A5

W. Edens and C. , Recent Innovation in Flux Leakage Drillpipe Inspection Technology: Quality Control Enhanced, vol.515, p.860

E. A. Shaffer, Drillstring Problems Related to Internal Upset-Run-Cut Area of Drillpipe, 1992.

G. M. Armstrong, Sensitivity and Application of the Normal Beam Ultrasonic Technique for Detection of Fatigue Cracks in Rotary Shouldered Connections, 1985.

P. W. Chapman, Ultrasonics Finds Drillpipe Cracks. Drilco, Petroleum Engineer International, 1986.

R. K. Stanley and L. Wells, Recent Advances in Used Drillpipe Inspection by Ultrasonic Methods. Material Evaluation, pp.1282-1285, 1994.

D. Ananto, Determining Drillpipe Wear Inside Casing Using Ultrasonic Measurements. Twenty-fifth Silver Anniversary Convention, Indonesian Petroleum Association, Proceedings, pp.411-423, 1996.

H. Walaszek, Le contrôle ultrasonore possible aujourd'hui sans couplant ? Présentation de quelques résultats obtenus au CETIM, CETIM, Service CND, 1998.

B. A. Dale, Inspection Interval Guidelines to Reduce Drillstring Failures, Drilling Conference SPE/IADC 17207, p.33, 1982.

A. Ligrone, Reliability Methods Applied to Drilling Operations, Agip SpA, Drilling Conference, 1995.

D. L. Yoder, An Integrated Approach to Enhancing the Mechanical Life of Drillpipe in Extended Reach Wells, OTC, vol.6712, 1991.

R. P. Gensmer, Field Correlation Between Internal Taper Length and Tube Failures in 4.5-in. 16.60E, IEU Drillpipe. Noble Drilling Corp, Drilling Conference IADC/SPE 17205, 1988.

J. G. Gonzalez-rodriguez, Corrosion Fatigue of AISI 4145 Steel in Drilling Mud. NACE Annual Conference and Corrosion Show, p.151, 1992.

P. V. Seshadri, Drillstring Failure Database: What Do We Learn? API/IADC, Drilling Conference IADC/SPE 23842, 1992.

F. P. Brennan, Fatigue of Drillstring Connections. Transaction of the ASME, vol.117, 1995.

P. R. Hatcher and K. E. Szklarz, Near-Threshold Fatigue Crack Propagation Behavior of a Low Alloy Steel in Pressurized Dilute Brine Solution. NACE Annual Conference and Corrosion Show, p.150, 1992.

G. Y. Grondin and G. L. Kulak, Fatigue of Drillpipe. CADE/CAODC Spring Drilling Conference, pp.89-136, 1989.

A. Baryshnikov, Downhole Tool Full-Scale Fatigue Test: Experience and Practice Recommendations. ASME, 8th Annual International Energy Week Conference and Exhibition, 1997.

L. E. Trishman, Methods for the improvement of Drill Collar Joints Evaluated by Full-size Fatigue Tests. Spring Meeting of the Southwestern District, Division of Production, 1952.

T. M. Gaynor, Reduction in Fatigue Failures through Crack Detection by Alternating Current Field Measurement. Drilling Conference IADC/SPE 35033, 1996.

J. J. Azar, How O 2 , CO 2 and Chlorides Affect Drillpipe Fatigue. Petroleum Engineer International, 1979.

Z. Jiashen and Z. Jingmao, Increasing the Fatigue Life of 40-Cr Steel in Drilling Muds with Corrosion Inhibitors, NACE Corrosion, vol.49, 1993.

K. Khani and M. , Corrosion Fatigue in Nitrocarburized Quenched and Tempered Steels, Metallurgical and Materials Transactions, vol.27, 1996.

J. R. Hendrickson and M. R. Holland, Drillpipe Failures in Hydrogen Sulfide. Drilling Technology Conference Transactions, vol.358, 1984.

G. E. Wilson, A New Drillpipe Design Virtually Eliminates Failures That Result from Slip Damage. Drilling Conference IADC/SPE 35036, pp.12-15, 1996.

G. E. Wilson, How to Reduce Drillstring Fatigue Failures in a Corrosive Environment. Drilling 98, World Oil, 1998.

, API (1997) Standard Procedure for Field Testing WaterBased Drilling Fluids. API-RP-13B-1

A. , Standard Procedure for Field Testing Oil-Based Drilling Fluids. API-RP-13B-2, 1998.

Y. Tsukano, Appropriate Design of Drillpipe Internal Uset Geometry Focusing on Fatigue Property, Drilling Conference IADC/SPE 17206, 0282.

T. E. Winship, Making Drillpipe Upsets which Increase Fatigue Life. Spring Drilling Conference CADE/CAODC, pp.95-1009, 1995.

G. E. Wilson, What difference Does Internal Taper Length Make on Drillpipe Fatigue Life? Drilling and Completion, SPE 23841, 1994.

G. E. Wilson, A New Tool-Joint Design Increases the Fatigue Life of Drillpipe Tubes. Drilling Conference SPE/IADC 25772, 1993.

Y. Tsukano, Improvement of Drill Collar Fatigue Property by Last Engaged Thread Height Reduction of Pin. Drilling Engineering, SPE 18704, 1990.

P. D. Weiner, A Means of Increasing Drill Collar Connection Life. Transactions of the ASME, Journal of Engineering for Industry, 1972.

M. J. Knight, Fatigue Life Improvement of Drill Collars Through Control of Bore Eccentricity, Engineering Failure Analysis, vol.6, pp.301-319, 1999.

G. M. Armstrong, Failure Prevention by Selection and Analysis of Drillstem Connections. Drilling Conference SPE/IADC 16075, pp.15-18, 1987.
DOI : 10.2118/16075-ms

W. L. Kirk, Deep Drilling Practices in Mississippi, Journal of Petroleum Technology, 1972.
DOI : 10.2118/3510-pa

W. H. Schock, One Piece, Forged, Heavy Wall Drillpipe: Built Stronger for Tougher Drilling. Drilling Conference IADC/SPE 14792, 1986.
DOI : 10.2118/14792-ms

G. Gabolde and J. P. Nguyen, Drilling Data Handbook, Publications de l'Institut français du pétrole, Éditions Technip, 1999.

A. Baryshnikov, Optimization of Rotary-Shouldered Connection Reliability and Failure Analysis. Drilling Conference IADC/SPE 27535, 1994.
DOI : 10.2118/27535-ms

A. Baryshnikov, Downhole Tools Fatigue Resistance for Different Materials. Drilling Technology, ASME, PD, p.65, 1995.

E. I. Bailey, Calculating Limits for Torsion and Tensile Loads on Drillpipe. Hart's Petroleum Engineer International, 1998.

M. L. Payne, Drillstring Design Options for Extended Reach Drilling Operations. Drilling Technology, ASME, PD, p.65, 1995.

A. , Recommended Practice for Testing of Thread Compound for Rotary Shouldered Connections, 1992.

, API (1983) Tentative API Bulletin on Rotary Shouldered Connection Thread Compounds. Bulletin API-7A1, 1980.

A. Baryshnikov, Make-up Torque and Rotary Shouldered Connection Reliability. Drilling Conference SPE/IADC 29352, 1995.
DOI : 10.2523/29352-ms

A. Baryshnikov, Eliminating Twist-Offs as a Cause of Drillstring Failure, OCTG Special Report, 1999.

M. W. Slack, Technique to Assess Directly Make-up Contact Stress Inside Tubular Connections. Drilling Conference IADC/SPE, 0272.
DOI : 10.2523/19924-ms

Y. Tsukano, Development of Lightweight Steel Drillpipe with 165-ksi Yield Strength. Drilling Conference IADC/SPE, 1990.

M. A. Glagola, Aluminium Drillpipe for Directional Drilling. Drilling Conference IADC/SPE 14789, 1986.
DOI : 10.2118/14789-ms

A. Schenato, G. Borriello, and V. Pozzi, Ultra Deep Drilling Problems and Solutions, 1991.

L. F. Eaton, Tool-Joint Heat Checking While Predrilling for Auger TLP Project. Drilling Conference SPE/IADC 25776, 1993.
DOI : 10.2118/25776-ms

K. E. Szklarz, Fracture Toughness Criteria for HighStrength Drillpipe. Shell Canada Ltd, Drilling Conference IADC/SPE, 1990.
DOI : 10.2523/19964-ms

J. Guesnon and G. Pignard, IFP Field Tests its New Trafor MWD System. Ocean Industry, pp.23-28, 1992.

C. Mabile, J. B. Fay, and O. Desloovere, Standard Surface Measurements Sampled at High Acquisition Rate Help in Detecting Drill String Vibrations, Offshore Mediterranean Conf. OMC 97, pp.759-769, 1997.