A. Wahabi, S. M. Froment, and G. F. , Single Event Kinetic Modeling of the Methanol-to-Olefins Process on SAPO-34, Ind. Eng. Chem. Res, vol.43, pp.5098-5111, 2004.

J. Ancheyta-juárez, E. Villafuerte-macías, L. Díaz-garcía, and E. González-arredondo, Modeling and Simulation of Four Catalytic Reactors in Series for Naphtha Reforming, Energ. Fuel, vol.15, pp.887-893, 2001.

M. A. Baltanas and G. F. Froment, Computer generation of reaction networks and calculation of product distributions in the hydroisomerization and hydrocracking of paraffins on Pt-containing bifunctional catalysts, Comp. Chem. Eng, vol.9, pp.71-81, 1985.

M. A. Baltanas, K. K. Van-raemdonck, G. F. Froment, and S. R. Mohedas, Fundamental kinetic modeling of hydroisomerization and hydrocracking on noble metal-loaded faujasites. 1. Rate parameters for hydroisomerization, Ind. Eng. Chem. Res, vol.28, pp.899-910, 1989.

F. Battin-leclerc, P. A. Glaude, V. Warth, R. Fournet, G. Scacchi et al., Computer tools for modelling the chemical phenomena related to combustion, Chem. Eng. Sci, vol.55, pp.2883-2893, 2000.

S. W. Benson, F. R. Cruickshank, D. M. Golden, G. R. Haugen, H. E. O'neal et al., Additivity rules for estimation of thermodynamical properties, Chem. Rev, vol.69, pp.279-324, 1969.
DOI : 10.1021/cr60259a002

S. W. Benson, Thermochemical Kinetics, 1976.

E. S. Blurock, Reaction: System for Modeling Chemical Reactions, J. Chem. Inf. Comput. Sci, vol.35, pp.607-616, 1995.
DOI : 10.1021/ci00025a032

H. Bockhorn, Mathematical modeling, in Ullmann's Encyclopedia of Industrial Chemistry, 1990.

L. J. Broadbelt, S. M. Stark, and M. T. Klein, Computer-generated Pyrolysis Modeling-on-the-fly Generation of Species, Reactions, and Rates, Ind. Eng. Chem. Res, vol.33, pp.790-799, 1994.

L. J. Broadbelt, C. Lamarca, M. T. Klein, B. D. Dean, and S. M. Andrews, Chemical Modeling Analysis of Poly, 1995.

, Thermal Stability through Computer-Generated Reaction Mechanisms, Ind. Eng. Chem. Res, vol.34, pp.4212-4221

D. M. Brouwer, Reactions of alkylcarbenium ions in reaction to isomerization and cracking of hydrocarbons, in Chemistry and Chemical Engineering of Catalytic Processes GCAS, Alphen aan de Rijn, 1980.

L. G. Bruk, S. N. Gorodskii, A. V. Zeigarnik, R. E. Valdés-pérez, and O. N. Temkin, Oxidative carbonylation of phenylacetylene catalyzed by Pd(II) and Cu(I): Experimental tests of forty-one computer-generated mechanistic hypotheses, J. Mol. Catal. A: Chem, vol.130, pp.29-40, 1998.

F. Buda, B. Heyberger, R. Fournet, P. A. Glaude, V. Warth et al., Modeling of the gas-phase oxidation of cyclohexane, Energ. Fuel, vol.20, pp.1450-1459, 2006.

R. Burch and L. C. Garla, Platinum-Tin Reforming Catalysts. II. Activity and Selectivity in Hydrocarbon Reactions, J. Catal, vol.71, pp.360-372, 1981.

J. C. Chavarría-hernández, J. Ramírez, H. Gonzalez, and M. A. Baltanas, Modelling of n-Hexadecane Hydroisomerization and Hydrocracking Reactions on a Mo/H Beta-Alumina Bi-Functional Catalyst Using the Single Event Concept, Catal. Today, vol.98, pp.235-242, 2004.

J. C. Chavarría-hernández, J. Ramírez, and M. A. Baltanas, Single-event-lumped-parameter hybrid (SELPH) model for nonideal hydrocracking of n-octane, Catal. Today, vol.130, issue.2-4, pp.455-461, 2008.

C. Chevalier, J. Warnatz, and H. Melenk, Automatic Generation of Reaction Mechanisms for Description of Oxidation of Higher Hydrocarbons, Ber. Bunsenges. Phys. Chem, vol.94, pp.1362-1367, 1990.

C. Chevalier, W. J. Pitz, J. Warnatz, C. K. Westbrook, and H. Melenk, Hydrocarbon Ignition: Automatic Generation of Reaction Mechanisms and Applications to Modeling of Engine Shock, Proc. Combust. Inst, vol.24, pp.1362-1367, 1992.

S. J. Chinnick, D. L. Baulch, and P. B. Ayscough, An expert system for hydrocarbon pyrolysis reactions, Chemom. Intell. Lab. Syst, vol.5, pp.39-52, 1988.

G. Christensen, M. R. Apelian, K. J. Hickey, and S. B. Jaffe, Future directions in modeling the FCC process: An emphasis on product quality, Chem. Eng. Sci, vol.54, pp.2753-2764, 1999.

F. C. Ciapetta, Catalytic Reforming, Petro/Chem. Engr, vol.33, pp.19-31, 1961.

F. C. Ciapetta and D. N. Wallace, Catalytic Naphtha Reforming, Catal. Rev, vol.5, pp.67-158, 1971.

P. J. Clymans and G. F. Froment, Computer generation of reaction paths and rate equations in the thermal cracking of normal and branched paraffins, Comput. Chem. Eng, vol.8, pp.137-142, 1984.

H. Cochegrue, Modélisation cinétique du reformage catalytique sur catalyseur Pt-Sn/Al 2 O 3, 2001.

B. H. Davis, Alkane dehydrocyclization mechanism, Catal. Today, vol.53, pp.443-516, 1999.

M. Dente, S. Pierucci, E. Ranzi, and G. Bussani, New improvements in modeling kinetic schemes for hydrocarbons pyrolysis reactors, Chem. Eng. Sci, vol.51, pp.2629-2634, 1992.

N. V. Dewachtere, F. Santaella, and G. F. Froment, Application of a single-event kinetic model in the simulation of an industrial riser reactor for the catalytic cracking of vacuum gas oil, Chem. Eng. Sci, vol.54, pp.3653-3660, 1999.

M. J. Dewitt, D. J. Dooling, and L. J. Broadbelt, Computer Generation of Reaction Mechanisms Using Quantitative Rate Information: Application to Long-Chain Hydrocarbon Pyrolysis, Ind. Eng. Chem. Res, vol.39, pp.2228-2237, 2000.

F. P. Dimaio and P. G. Lignola, KING, a Kinetic Network Generator, Chem. Eng. Sci, vol.47, pp.2713-2718, 1992.

J. L. Faulon and A. G. Sault, Stochastic Generator of Chemical Structure. 3. Reaction Network Generation, J. Chem. Inf. Comp. Sci, vol.41, pp.894-908, 2001.

W. Feng, E. Vynckier, and G. F. Froment, Single-event kinetics of catalytic cracking, Ind. Eng. Chem. Res, vol.32, pp.2997-3005, 1993.

E. Fontain and K. Reitsam, The Generation of Reaction Networks with RAIN. 1. The Reaction Generator, J. Chem. Inf. Comp. Sci, vol.31, pp.96-101, 1991.

M. Frenklach, Modeling of large reaction systems, Complex chemical reaction systems, mathematical modelling and simulation, Springer Series in Chemical Physics, pp.2-16, 1987.

G. F. Froment and L. H. Hosten, Catalytic Kinetics: Modelling, in Catalysis: Science and Technology, pp.97-170, 1981.

G. F. Froment, Fundamental Kinetic Modeling of Complex Processes, Chemical Reactions in complex systems: the Mobil Workshop, pp.77-100, 1991.

G. F. Froment, Kinetic modeling of acid-catalyzed oil refining processes, Catal. Today, vol.52, pp.153-163, 1999.

G. F. Froment, Single Event Kinetic Modeling of Complex Catalytic Processes, Catal. Rev, vol.47, pp.83-124, 2005.

B. C. Gates, J. R. Katzer, and G. C. Schmit, Chemistry of Catalytic Processes, 1979.

P. Gaffuri, T. Faravelli, E. Ranzi, N. P. Cernansky, D. Miller et al., Comprehensive kinetic model for the lowtemperature oxidation of hydrocarbons, AIChE J, vol.43, pp.1278-1286, 1997.

P. Gauthier, Modèle cinétique regroupé, basé sur la generation du réseau d'étapes élémentaires, du reformage catalytique régénératif, 2004.

P. A. Glaude, V. Warth, R. Fournet, F. Battin-leclerc, G. M. Côme et al., Modelling of n-heptane and iso-octane gas phase oxidation at low temperature by using computer-aided designed mechanisms, B. Soc. Chim. Belg, vol.106, pp.343-348, 1997.

P. A. Glaude, V. Warth, R. Fournet, F. Battin-leclerc, G. M. Côme et al., Modelling of the oxidation of n-octane and ndecane using an automatic generation of mechanisms, Int. J. Chem. Kinet, vol.30, pp.949-959, 1998.

W. H. Green, P. I. Barton, B. Bhattacharjee, D. M. Matheu, D. A. Schwer et al., Computer Construction of Detailed Chemical Kinetic Models for Gas-Phase Reactors, Ind. Eng. Chem. Res, vol.40, pp.5362-5370, 2001.

J. M. Grenda, I. P. Androulakis, A. M. Dean, and W. H. Green, Application of Computational Kinetic Mechanism Generation to Model the Autocatalytic Pyrolysis of Methane, Ind. Eng. Chem. Res, vol.42, pp.1000-1010, 2003.

D. Guillaume, K. Surla, and P. Galtier, From Single Events theory to molecular kinetics-application to industrial process modeling, Chem. Eng. Sci, vol.58, pp.4861-4869, 2003.

L. P. Hillewaert, J. L. Dierickx, and G. F. Froment, Computer generation of reaction schemes and rate equations for thermal cracking, AIChE J, vol.34, pp.17-24, 1988.

D. M. Himmelblau, Process Analysis by Statistical Methods, 1970.

G. Hou and M. T. Klein, Molecular modeling of gas oil hydrodesulfurization, Abstracts of Papers of the, vol.218, pp.610-611, 1999.

S. D. Iyer, P. V. Joshi, and M. T. Klein, Automated model building and modeling of alcohol oxidation in high temperature water, Environ. Prog, vol.17, pp.221-233, 1998.

W. D. Ihlenfeldt and J. Gasteiger, Computer-Assisted Planning of Organic Syntheses: The Second Generation of Programs, Angew. Chem. (International Edition in English), vol.34, pp.2613-2633, 1996.

S. B. Jaffe, H. Freund, and W. N. Olmstead, Extension of Structure-Oriented Lumping to Vacuum Residua, Ind. Eng. Chem. Res, vol.44, pp.9840-9852, 2005.

P. V. Joshi, S. D. Iyer, and M. T. Klein, Computer assisted modeling of gas oil fluid catalytic cracking (FCC), Abstracts of Papers of the, vol.214, pp.80-81, 1997.

P. V. Joshi, S. D. Iyer, and M. T. Klein, Automated kinetic modelling of gas oil catalytic cracking, Rev. Process Chem. Engin, vol.1, pp.110-140, 1998.

P. V. Joshi, M. T. Klein, A. L. Huebner, and R. W. Leycrle, Automated kinetic modelling of catalytic reforming at the reaction pathways level, Rev. Process Chem. Engin, vol.2, pp.169-193, 1999.

S. Katare, J. M. Caruthers, W. N. Delgass, and V. Venkatasubramanian, An Intelligent System for Reaction Kinetic Modeling and Catalyst Design, Ind. Eng. Chem. Res, vol.43, pp.3484-3512, 2004.

J. R. Kittrell, Mathematical Modeling of Chemical Reactions, Adv. Chem. Eng, vol.8, pp.97-183, 1970.

H. Cochegrue, Reduction of Single Event Kinetic Models by Rigorous Relumping: Application to Catalytic Reforming 395

M. T. Klein, G. Hou, R. J. Quann, W. Wei, K. H. Liao et al., BioMol: Computer-Assisted Biological Modeling of Complex Chemical Mixtures and Biological Processes at the Molecular Level, Environ. Health Persp, vol.110, pp.1025-1029, 2002.

M. T. Klein, G. Hou, R. J. Bertolacini, L. J. Broadbelt, and A. Kumar, Molecular Modeling in Heavy Hydrocarbon Conversions, 2006.

D. J. Klinke and L. J. Broadbelt, Construction of a Mechanistic Model of Fischer-Tropsch Synthesis on Ni(111) and Co(0001) Surfaces, Chem. Eng. Sci, vol.54, pp.3379-3389, 1999.

W. S. Kmak, A Kinetic Simulation Model of the Powerforming Process, Paper presented at the AIChE National Meeting, 1971.

W. S. Kmak and A. N. Stuckey, Powerforming Process Studies with a Kinetic Simulation Model, Paper presented at the AIChE National Meeting, 1973.

T. M. Kruse, O. S. Woo, and L. J. Broadbelt, Detailed mechanistic modeling of polymer degradation: application to polystyrene, Chem. Eng. Sci, vol.56, pp.971-979, 2001.

T. M. Kruse, O. S. Woo, H. W. Wong, S. S. Kahn, and L. J. Broadbelt, Mechanistic Modeling of Polymer Degradation: A Comprehensive Study of Polystyrene, Macromolecules, vol.35, pp.7830-7844, 2002.

T. M. Kruse, H. W. Wong, and L. J. Broadbelt, Mechanistic Modeling of Polymer Pyrolysis: Polypropylene, Macromolecules, vol.36, pp.9594-9607, 2003.

H. Kumar and G. F. Froment, A generalized mechanistic kinetic model for the hydroisomerization and hydrocracking of long-chain paraffins, Ind. Eng. Chem. Res, vol.46, pp.4075-4090, 2007.

H. Kumar and G. F. Froment, Mechanistic Kinetic Modeling of the Hydrocracking of Complex Feedstocks, such as Vacuum Gas Oils, Ind. Eng. Chem. Res, vol.46, pp.5881-5897, 2007.

L. Narasimhan, C. S. Thybaut, J. W. Marin, G. B. Jacobs, P. A. Martens et al., Kinetic modeling of pore mouth catalysis in the hydroconversion of n-octane on Pt-HZSM-22, J. Catal, vol.220, pp.399-413, 2003.

L. Narasimhan, C. S. Thybaut, J. W. Marin, G. B. Denayer, J. F. Baron et al., Relumped singleevent microkinetic model for alkane hydrocracking on shape-selective catalysts: catalysis on ZSM-22 pore mouths, bridge acid sites and micropores, Chem. Eng. Sci, vol.59, pp.4765-4772, 2004.

K. Levenberg, A Method for the Solution of Certain Problems in Least Squares, Quart. Appl. Math, vol.2, pp.164-168, 1944.

S. E. Levine and L. J. Broadbelt, Detailed mechanistic modeling of high-density polyethylene pyrolysis: Low molecular weight product evolution, Polym. Degrad. Stab, vol.94, pp.810-822, 2009.

G. Lozano-blanco, J. W. Thybaut, K. Surla, P. Galtier, and G. B. Marin, Fischer-Tropsch Synthesis: Development of a Microkinetic Model for Metal Catalysis, Oil Gas Sci. Technology-Rev. IFP, vol.61, pp.489-496, 2006.
URL : https://hal.archives-ouvertes.fr/hal-02005854

G. Lozano-blanco, J. W. Thybaut, K. Surla, P. Galtier, and G. B. Marin, Single-Event Microkinetic Model for Fischer-Tropsch Synthesis on Iron-Based Catalysts, Ind. Eng. Chem. Res, vol.47, pp.5879-5891, 2008.

G. L. Maire and F. G. Garin, Metal Catalyzed Skeletal Reactions of Hydrocarbons, pp.162-226, 1984.

C. Marcilly, Catalyse acido-basique, vol.1, 2003.

G. B. Marin and G. F. Froment, Reforming of C 6-Hydrocarbons on a Pt/Al 2 O 3 Catalyst, Chem. Eng. Sci, vol.37, pp.759-773, 1982.

G. B. Marin, G. F. Froment, J. J. Lerou, D. Backer, and W. , Simulation of a Catalytic Naphtha Reforming Unit, Proc. 3rd Int. Congress on Computers and Chemical Engineering, vol.27, 1983.

G. B. Marin and G. F. Froment, The Development and Use of Rate Equations for Catalytic Refinery Processes, Proc. 1st Kuwait Conference on Hydrotreating Processes, pp.497-511, 1989.

D. Marquardt, An Algorithm for Least-Squares Estimation of Nonlinear Parameters, J. Soc. Ind. Appl. Math, vol.11, pp.431-441, 1963.

G. G. Martens and G. F. Froment, Kinetic modeling of paraffins hydrocracking based upon elementary steps and the single event concept, in Reaction kinetics and the development of catalytic processes, Stud. Surf. Sci. Catal, vol.122, pp.333-340, 1999.

G. G. Martens, G. B. Marin, J. A. Martens, P. A. Jacobs, and G. V. Baron, A fundamental kinetic model for hydrocracking of C8 to C12 alkanes on Pt/US-Y zeolites, J. Catal, vol.195, pp.253-267, 2000.

G. G. Martens, J. W. Thybaut, and G. B. Marin, Single event rate parameters for hydrocracking of cycloalkanes on Pt/US-Y zeolites, Ind. Eng. Chem. Res, vol.40, pp.1832-1844, 2001.

J. M. Martinis and G. F. Froment, Alkylation on Solid Acids. Part 2. Single-Event Kinetic Modeling, Ind. Eng. Chem. Res, vol.45, pp.954-967, 2006.

G. Martino, Le raffinage du pétrole. 3. Procédés de transformation, Editions Technip, pp.105-173, 1998.

D. M. Matheu, T. A. Lada, W. H. Green, A. M. Dean, and J. M. Grenda, Rate-based screening of pressure-dependent reaction networks, Comput. Phys. Commun, vol.138, pp.237-249, 2001.

D. M. Matheu, A. M. Dean, J. M. Grenda, and W. H. Green, Mechanism Generation with Integrated Pressure dependence: A New Model for Methane Pyrolysis, J. Phys. Chem. A, vol.107, pp.8552-8565, 2003.

G. A. Mills, H. Heinemann, T. H. Milliken, and A. G. Oblad, Houdriforming reactions: Catalytic Mechanism, Ind. Eng. Chem, vol.45, pp.134-137, 1953.

M. Mitsios, D. Guillaume, P. Galtier, and D. Schweich, SingleEvent Microkinetic Model for Long-Chain Paraffin Hydrocracking and Hydroisomerization on an Amorphous Pt/SiO 2-Al 2 O 3 Catalyst, Ind. Eng. Chem. Res, vol.48, pp.3284-3292, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01933121

T. I. Mizan and M. T. Klein, Computer-assisted mechanistic modeling of n-hexadecane hydroisomerization over various bifunctional catalysts, Catal. Today, vol.50, pp.159-172, 1999.

T. Moustafa and G. F. Froment, Kinetic Modeling of Coke Formation and Deactivation in the Catalytic Cracking of Vacuum Gas Oil, Ind. Eng. Chem. Res, vol.42, pp.14-25, 2003.

A. Németh, T. Vidóczy, K. Héberger, Z. Kúti, and J. Wágner, MECHGEN: Computer Aided Generation and Reduction of Reaction Mechanisms, J. Chem. Inf. Comput. Sci, vol.42, pp.208-214, 2002.

G. A. Olah, G. K. Prakash, and J. Sommer, , 1985.

T. Park and G. F. Froment, Kinetic Modeling of the MTO Process-I. Model Formulation, Ind. Eng. Chem. Res, vol.40, pp.4172-4186, 2001.

T. Park and G. F. Froment, Analysis of fundamental reaction rates in the methanol-to-olefins process on ZSM-5 as a basis for reactor design and operation, Ind. Eng. Chem. Res, vol.43, pp.682-689, 2004.

J. Pfaendtner and L. J. Broadbelt, Mechanistic Modeling of Lubricant Degradation. 1. Structure-Reactivity Relationships for Free-Radical Oxidation, Ind. Eng. Chem. Res, vol.47, pp.2886-2896, 2008.

J. Pfaendtner and L. J. Broadbelt, Mechanistic Modeling of Lubricant Degradation. 2. The Autoxidation of Decane and Octane, Ind. Eng. Chem. Res, vol.47, pp.2897-2904, 2008.

S. E. Prickett and M. L. Mavrovouniotis, Construction of Complex Reaction Systems-I. Reaction description language, Comput. Chem. Eng, vol.21, pp.1219-1235, 1997.

S. E. Prickett and M. L. Mavrovouniotis, Construction of Complex Reaction Systems-II. Molecule manipulation and reaction application algorithms, Comput. Chem. Eng, vol.21, pp.1237-1254, 1997.

S. E. Prickett and M. L. Mavrovouniotis, Construction of Complex Reaction Systems-III. An example: alkylation of olefins, Comput. Chem. Eng, vol.21, pp.1325-1337, 1997.

R. J. Quann and S. B. Jaffe, Structure-oriented lumping: describing the chemistry of complex hydrocarbon mixtures, Ind. Eng. Chem. Res, vol.31, pp.2483-2497, 1992.

R. J. Quann and S. B. Jaffe, Building useful models of complex reaction systems in petroleum refining, Chem. Eng. Sci, vol.51, pp.1615-1635, 1996.

R. J. Quann, Modeling the Chemistry of Complex Petroleum Mixtures, Environ. Health Persp, vol.106, pp.1441-1448, 1998.

R. Quintana-solórzano, J. W. Thybaut, G. B. Marin, R. Lødeng, and A. Holmen, Single-Event MicroKinetics for coke formation in catalytic cracking, Catal. Today, vol.107, pp.619-629, 2005.

R. Quintana-solórzano, J. W. Thybaut, and G. B. Marin, A single-event microkinetic analysis of the catalytic cracking of (cyclo)alkanes on an equilibrium catalyst in the absence of coke formation, Chem. Eng. Sci, vol.62, pp.5033-5038, 2007.

R. Quintana-solórzano, J. W. Thybaut, P. Galtier, and G. B. Marin, Single-Event MicroKinetics for coke formation during the catalytic cracking of (cyclo)alkane/1-octene mixtures, Catal. Today, vol.127, pp.17-30, 2007.

M. P. Ramage, K. R. Graziani, and F. J. Krambeck, Development of Mobil's Reforming Model, Chem. Eng. Sci, vol.35, pp.41-48, 1980.

M. P. Ramage, K. R. Graziani, P. H. Schipper, F. J. Krambeck, and B. C. Choi, KINPtR (Mobil's Kinetic Reforming Model): A Review of Mobil's Industrial Process Modeling Philosophy, vol.13, pp.193-266, 1987.

E. Ranzi, T. Faravelli, P. Gaffuri, and A. Sogaro, Low Temperature Combustion-Automatic-Generation of Oxidation Reactions and Lumping procedures, Combust. Flame, vol.102, pp.179-192, 1995.

A. Ratkiewicz and T. N. Truong, Application of Chemical Graph Theory for Automated Mechanism Generation, J. Chem. Inf. Comput. Sci, vol.43, pp.36-44, 2003.

A. Ratkiewicz and T. N. Truong, Automated mechanism generation: From symbolic calculation to complex chemistry, Int. J. Quantum Chem, vol.106, pp.244-255, 2006.

A. V. Sapre, Kinetic Modelling at Mobil: A Historical Perspective, Chemical Reactions in Complex Mixtures: the Mobil Workshop, vol.12, pp.222-253, 1991.

P. H. Schipper, K. R. Graziani, B. C. Choi, and M. P. Ramage, The Extension of Mobil's Kinetic Reforming Model to include Catalyst Deactivation, Int. Chem. Eng. Symp. Ser, vol.87, pp.33-44, 1984.

J. H. Sinfelt, H. Hurwitz, and J. C. Rohrer, Kinetics of n-Pentane Isomerization over Pt/Al 2 O 3 Catalyst, J. Phys. Chem, vol.64, pp.892-894, 1960.

J. H. Sinfelt, H. Hurwitz, and J. C. Rohrer, Role of Dehydrogenation Activity in Catalytic Isomerization and Dehydrocyclization of Hydrocarbons, J. Catal, vol.1, pp.481-483, 1962.

J. H. Sinfelt, Catalytic Reforming of Hydrocarbons, in Catalysis: Science and Technology, vol.1, pp.257-300, 1981.

J. H. Sinfelt, Handbook of Heterogeneous Catalysis, Part B: Catalytic Processes, vol.4, pp.1939-1954, 1997.

J. Song, S. Raman, J. Yu, C. D. Wijaya, G. Stephanopoulos et al., Development of Automatic Chemical Reaction Mechanism Generation Software Using Object-Oriented Technology, Prepr. Pap.-Am. Chem. Soc., Div. Fuel Chem, vol.48, pp.516-517, 2003.

R. Sotelo-boyás and G. F. Froment, Fundamental Kinetic Modeling of Catalytic Reforming, Ind. Eng. Chem. Res, vol.48, pp.1107-1119, 2009.

W. Souverijns, R. Parton, J. A. Martens, G. F. Froment, and P. A. Jacobs, Mechanism of the paring reaction of naphtenes, Catal. Lett, vol.37, pp.207-212, 1996.

M. J. Sterba and V. Haensel, Catalytic Reforming, Ind. Eng. Chem. Prod. Res. Dev, vol.15, pp.2-17, 1976.

R. F. Sullivan, C. J. Egan, G. E. Langlois, and R. P. Sieg, A New Reaction That Occurs in the Hydrocracking of Certain Aromatic Hydrocarbons, J. Am. Chem. Soc, vol.83, pp.1156-1160, 1961.

K. Surla, D. Guillaume, J. J. Verstraete, and P. Galtier, Single Event Kinetic Modeling: application to isomerization of light paraffins, Oil Gas Sci. Technol, vol.66, pp.343-365, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01937403

R. G. Susnow, A. M. Dean, W. H. Green, P. Peczak, and L. J. Broadbelt, Rate-Based Construction of Kinetic Models for Complex Systems, J. Phys. Chem. A, vol.101, pp.3731-3740, 1997.

G. D. Svoboda, E. Vynckier, B. Debrabandere, and G. F. Froment, Single-Event Rate Parameters for Paraffin Hydrocracking on a Pt/US-Y Zeolite, Ind. Eng. Chem. Res, vol.34, pp.3793-3800, 1995.

O. N. Temkin, A. V. Zeigarnik, A. E. Kuz'min, L. G. Bruk, and E. V. Slivinskii, Construction of the reaction networks for heterogeneous catalytic reactions: Fischer-Tropsch synthesis and related reactions, Russ. Chem. Bull. Int. Ed, vol.51, pp.1-36, 2002.

J. W. Thybaut and G. B. Marin, Kinetic Modeling of the Conversion of Complex Hydrocarbon Feedstocks by Acid Catalysis, Chem. Eng. Technol, vol.26, pp.509-514, 2003.

A. S. Tomlin, T. Turányi, and M. J. Pilling, Mathematical tools for the construction, investigation and reduction of combustion mechanisms, Oil Gas J, vol.108, pp.50-59, 1997.

I. Ugi, J. Bauer, K. Bley, A. Dengler, A. Dietz et al., Computer Assisted Solution of Chemical Problems-The Historical Development and the Present State of the Art of a New Discipline of Chemistry, Angew. Chem. Int. Ed. Engl, vol.32, pp.201-227, 1993.

K. M. Van-geem, M. F. Reyniers, G. B. Marin, J. Song, D. M. Mattheu et al., Automatic Network generation using RMG for Steam Cracking of n-Hexane, AIChE J, vol.52, pp.718-730, 2006.

K. M. Van-geem, M. F. Reyniers, and G. B. Marin, Challenges of Modeling Steam Cracking of Heavy Feedstocks, Oil Gas Sci. Technol.-Rev. IFP, vol.63, pp.79-94, 2008.
URL : https://hal.archives-ouvertes.fr/hal-02001985

P. A. Van-trimpont, G. B. Marin, and G. F. Froment, Activities and Selectivities for Reforming Reactions on Unsulphided and Sulphided Commercial Platinum and Platinum-Rhenium Catalysts, Appl. Catal, vol.17, pp.161-173, 1985.

P. A. Van-trimpont, G. B. Marin, and G. F. Froment, Kinetics of Methyl cyclohexane Dehydrogenation on Sulphided Commercial Pt/Al 2 O 3 and Pt-Re/Al 2 O 3 Catalysts, Ind. Eng. Chem. Fund, vol.25, pp.53-68, 1986.

P. A. Van-trimpont, G. B. Marin, and G. F. Froment, Reforming of C 7-Hydrocarbons on a Sulphided Commercial Pt/Al 2 O 3 Catalyst, Ind. Eng. Chem. Res, vol.27, pp.51-57, 1988.

J. Verstraete, Kinetische Studie van de Katalytische Reforming van Nafta over een Pt-Sn/Al 2 O 3 Katalysator, 1997.

G. E. Vleduts, Concerning One System of Classification and Codification of Organic Reactions, Inf. Storage Retr, vol.1, pp.117-146, 1963.

E. Vynckier and G. F. Froment, Modeling of the kinetics of complex processes upon elementary steps, in Kinetic and thermodynamic lumping of multicomponent mixtures, pp.131-161, 1991.

V. Warth, F. Battin-leclerc, R. Fournet, P. A. Glaude, G. M. Come et al., Computer based generation of reaction mechanisms for gas-phase oxidation, Comput. Chem, vol.24, pp.541-560, 2000.

W. Wei, C. A. Bennett, R. Tanaka, G. Hou, and M. T. Klein, Detailed kinetic models for catalytic reforming, Fuel Process. Technol, vol.89, pp.344-349, 2008.

J. Weitkamp, S. Ernst, and H. G. Karge, Peculiarities in the Conversion of Naphthenes on Bifunctional Catalysts, Erdgas, Petrochemie vereinigt mit Brennstoff-Chemie, vol.37, pp.457-462, 1984.

P. A. Willems and G. F. Froment, Kinetic Modeling of the Thermal Cracking of Hydrocarbons. 1. Calculation of Frequency Factors, Ind. Eng. Chem. Res, vol.27, pp.1959-1966, 1988.

P. A. Willems and G. F. Froment, Kinetic Modeling of the Thermal Cracking of Hydrocarbons. 2. Calculation of Activation Energies, Ind. Eng. Chem. Res, vol.27, 1966.

H. W. Wong, X. Li, M. T. Swihart, and L. J. Broadbelt, Detailed Kinetic Modeling of Silicon Nanoparticle Formation Chemistry via Automated Mechanism Generation, J. Phys. Chem. A, vol.108, pp.10122-10132, 2004.

A. V. Zeigarnik, R. E. Valdés-pérez, O. N. Temkin, L. G. Bruk, and S. I. Shalgunov, Computer-Aided Mechanism Elucidation of Acetylene Hydrocarboxylation to Acrylic Acid Based on a Novel Union of Empirical and Formal Methods, Organometallics, vol.16, pp.3114-3127, 1997.