B. Metz, O. Davidson, H. De-coninck, M. Loos, and L. Meyer, IPCC Special Report on Carbon Dioxide Capture and Storage, 2005.

C. R. Forero, P. Gayán, L. F. De-diego, A. Abad, F. García-labiano et al., Syngas combustion in a 500 Wth ChemicalLooping Combustion system using an impregnated Cu-based oxygen carrier, Fuel Process. Technol, vol.90, pp.1471-1779, 2009.

L. F. De-diego, F. García-labiano, P. Gayan, J. Celaya, J. M. Palacios et al., Operation of a 10 kWth chemical-looping combustor during 200 h with a CuO.Al 2 O 3 oxygen carrier, Fuel, vol.86, pp.1036-1045, 2007.

P. Kolbitsch, T. Pröll, J. Bolhar-nordenkampf, and H. Hofbauer, Design of a Chemical Looping Combustor using a Dual Circulating Fluidized Bed Reactor System, Chem. Eng. Technol, vol.32, pp.398-403, 2009.

B. Kronberger, E. Johansson, G. Löffler, T. Mattisson, A. Lyngfelt et al., A Two-Compartment Fluidized Bed Reactor for CO 2 Capture by Chemical-Looping Combustion, Chem. Eng. Technol, vol.27, pp.1318-1326, 2004.

, ECI Conference on the 12th International Conference on Fluidization-New Horizons in Fluidization Engineering, 2007.

H. E. Andrus, J. H. Chiu, P. R. Thibeault, and A. Brautsch, The 34th International Technical Conference on Clean Coal & Fuel Systems, 2009.

S. Noorman, M. Van-sint-annaland, and H. Kuipers, Packed Bed Reactor Technology for Chemical-Looping Combustion, Ind. Eng. Chem. Res, vol.46, pp.4212-4220, 2009.

S. Noorman, International Oxy-Combustion Research Network, 2007.

M. Dahl-ivar, E. Bakken, Y. Larring, S. Aud, I. Håkonsen-silje et al., On the development of novel reactor concepts for chemical looping combustion, Energy Procedia, vol.1, pp.1513-1519, 2009.

A. Lyngfelt and H. Thunman, Construction and 100 h of Operational Experience of A 10-kW Chemical Looping Combustor, in Carbon Dioxide Capture for Storage in Deep Geologic Formations, 2005.

H. J. Ryu, G. T. Jin, and C. K. Yi, Demonstration of Inherent CO 2 Separation and No NOx Emission in a 50 kW ChemicalLooping Combustor: Continuous Reduction and Oxidation Experiment, 2005.

S. Laihong, W. Jiahua, and G. Zhengping, Reactivity deterioration of NiO/Al 2 O 3 oxygen carrier for chemical looping combustion of coal in a 10 kWth reactor, Combust. Flame, 2009.

T. Pröll, K. Rupanovits, P. Kolbitsch, J. Bolhàr-nordenkampf, and H. Hofbauer, Cold Flow Model Study on a Dual Circulating Fluidized Bed System for Chemical Looping Processes, Chem. Eng. Technol, vol.32, pp.418-427, 2009.

B. Kronberger, A. Lyngfelt, G. Lo1ffler, and H. Hofbauer, Design and Fluid Dynamic Analysis of a Bench-Scale Combustion System with CO 2 Separation-Chemical-Looping Combustion, Ind. Eng. Chem. Res, vol.44, pp.546-556, 2005.

T. Gauthier, J. Bayle, and P. Leroy, FCC: Fluidization Phenomena and Technologies, Oil Gas Sci. Technol.-Rev. IFP, vol.55, pp.187-207, 2000.
URL : https://hal.archives-ouvertes.fr/hal-02054020

P. Basu and J. Butler, Studies on the operation of loop-seal in circulating fluidized bed boilers, Appl. Energ, vol.86, pp.1723-1731, 2009.

P. Basu, Combustion and Gasification in Fluidized Beds, 2006.

J. W. Butler and P. Basu, ECI Conference on the 12th International Conference on Fluidization-New Horizons in Fluidization Engineering, 2007.

P. Gayan, A. Abad, J. Adanez, L. F. De-diego, and F. García-labiano, Reduction and oxidation kinetics of a copper-based oxygen carrier prepared by impregnation for chemical-looping combustion, Ind. Eng. Chem. Res, vol.43, pp.8168-8177, 2004.

D. Geldart and P. Jones, The behaviour of L-valve with granular solids, Powder Technol, vol.67, p.163, 1991.

T. M. Knowlton and I. Hirsan, Ninth Synthetic Pipeline Gas Symposium, 1997.

K. Smolders and J. Baeyens, The Operation of L-valve to Control Standpipe Flow, Adv. Powder Technol, vol.6, p.163, 1995.

S. Ergun, Fluid flow through packed columns, Chem. Eng. Process, vol.48, p.89, 1952.

P. Basu and L. Chen, An Analysis of Loop Seal Operations in a Circulating Fluidized Bed, Trans IChemE 78, 2000.

©. Copyright, IFP Energies nouvelles Permission to make digital or hard copies of part or all of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than IFP Energies nouvelles must be honored. Abstracting with credit is permitted. To copy otherwise, to republish, to post on servers, or to redistribute to lists, requires prior specific permission and/or a fee: Request permission from Information Mission, 2011.

L. Cheng and P. Basu, Effect of pressure on loop seal operation for a pressurized circulating fluidized bed, Powder Technol, vol.103, pp.203-211, 1999.

S. W. Kim, W. Namkung, and S. D. Kim, Solid Flow Characteristics in Loop-Seal of a Circulating Fluidized Bed, Korean J. Chem. Eng, vol.16, pp.82-88, 1999.

S. W. Kim and S. D. Kim, Effects of particle properties on solids recycle in loop-seal of a circulating fluidized bed, Powder Technol, vol.124, pp.76-84, 2002.

D. Kunii and O. Levenspiel, Fluidization Engineering, 1991.

A. Haider and O. Levenspiel, Drag coefficient and terminal velocity of spherical and non spherical particles, Powder Technol, vol.58, pp.63-70, 1989.