P. Alix and L. Raynal, Liquid distribution and liquid hold-up in modern high capacity packings, Chemical Engineering Research and Design, vol.86, issue.6, 2008.
DOI : 10.1016/j.cherd.2008.02.021

P. Alix and L. Raynal, Pressure Drop and Mass Transfer of a High Capacity Random Packing. Application to CO 2 Postcombustion Capture, Energy Procedia 1, pp.845-852, 2009.

P. Alix, L. Raynal, F. Abbe, M. Meyer, M. Prevost et al., Mass transfer and hydrodynamic characteristics of new carbon carbon packing: Application to CO2 post-combustion capture, Chemical Engineering Research and Design, vol.89, issue.9, pp.1658-1668, 2011.
DOI : 10.1016/j.cherd.2010.09.023

A. Aroonwilas, P. Tontiwachwuthikul, and A. Chakma, Effects of operating and design parameters on CO2 absorption in columns with structured packings, Separation and Purification Technology, vol.24, issue.3, pp.403-411, 2001.
DOI : 10.1016/S1383-5866(01)00140-X

A. Ataki, Wetting of Structured Packing Elements ? CFD and Experiment, 2006.

S. Chambers and M. Schultes, How to surpass conventional and high capacity structured packings with Raschig Super-Pak, Distillation and Absorption conference, Sept, pp.4-6, 2006.

P. V. Danckwerts, Gas-Liquid Reactions, Journal of The Electrochemical Society, vol.117, issue.10, 1970.
DOI : 10.1149/1.2407312

D. Brito, M. H. , V. Stockar, U. Bangester, A. M. Bomio et al., Effective Mass-Transfer Area in a Pilot Plant Column Equipped with Structured Packings and with Ceramic Rings, Industrial & Engineering Chemistry Research, vol.33, issue.3, pp.647-656, 1994.
DOI : 10.1021/ie00027a023

M. Duss, H. Meierhofer, and E. Dale, Effective Interfacial Area and Liquid Holdup of Nutter Rings at High Liquid Loads, Chemical Engineering & Technology, vol.24, issue.7, 2001.
DOI : 10.1002/1521-4125(200107)24:7<716::AID-CEAT716>3.0.CO;2-L

J. R. Fair and J. L. Bravo, Distillation columns containing structured packing, Chem. Eng. Prog, vol.86, pp.19-29, 1990.

Y. Haroun, D. Legendre, and L. Raynal, Direct numerical simulation of reactive absorption in gas???liquid flow on structured packing using interface capturing method, Chemical Engineering Science, vol.65, issue.1, 2010.
DOI : 10.1016/j.ces.2009.07.018

Y. Haroun, D. Legendre, and L. Raynal, Volume of fluid method for interfacial reactive mass transfer: Application to stable liquid film, Chemical Engineering Science, vol.65, issue.10, pp.2896-2909, 2010.
DOI : 10.1016/j.ces.2010.01.012

Y. Haroun, L. Raynal, and D. Legendre, Mass transfer and liquid hold-up determination in structured packing by CFD, Chemical Engineering Science, vol.75, pp.342-348, 2012.
DOI : 10.1016/j.ces.2012.03.011

URL : https://hal.archives-ouvertes.fr/hal-00920822

I. Brochure, Bulletin KGIMTP-I 2M0303B Available at http://www.koch-glitsch.com/masstransfer, 2003.

F. Kehrer, L. Spiegel, E. Kolesnikov, and P. Choo, Experimental Investigation and Modelling of Sulzer I-Ring Hydraulics, Chemical Engineering Research and Design, vol.84, issue.11, pp.1075-1080, 2006.
DOI : 10.1205/cherd06024

J. N. Knudsen, European Conference on CCS research, 10-11 Feb, 2009.

N. Kolev, S. V. Nakov, L. Ljutzkanov, and D. Kolev, Effective area of a highly efficient random packing, Chemical Engineering and Processing: Process Intensification, vol.45, issue.6, pp.429-436, 2006.
DOI : 10.1016/j.cep.2005.10.008

V. Linek, P. Petricek, P. Benes, and R. Brun, Effective interfacial area and liquid side mass-transfer coefficients in absorption columns packed with hydrophilized and untreated plastic packings, Trans. IChemE, Part A, Chem. Eng. Res. Des, vol.62, p.13, 1984.

V. Linek, T. Moucha, and F. J. Rejl, Hydraulic and Mass Transfer Characteristics of Packings for Absorption and Distillation Columns. Rauschert-Metall-Sattel-Rings, Chemical Engineering Research and Design, vol.79, issue.7, pp.725-732, 2001.
DOI : 10.1205/026387601753192046

A. Menon and M. Duss, Sulzer ? reducing the energy penalty for post-combustion CO2 capture, Carbon Capture J, 2005.

S. V. Nakov, N. Kolev, L. Ljutzkanov, and D. Kolev, Comparison of the effective area of some highly effective packings, Chemical Engineering and Processing: Process Intensification, vol.46, issue.12, pp.1385-1390, 2007.
DOI : 10.1016/j.cep.2006.11.002

Z. Olujic, Effect of Column Diameter on Pressure Drop of a Corrugated Sheet Structured Packing, Chemical Engineering Research and Design, vol.77, issue.6, pp.505-510, 1999.
DOI : 10.1205/026387699526539

C. F. Petre, F. Larachi, I. Illiuta, and B. P. Grandjean, Pressure drop through structured packings: Breakdown into the contributing mechanisms by CFD modeling, Chemical Engineering Science, vol.58, issue.1, pp.163-177, 2003.
DOI : 10.1016/S0009-2509(02)00473-6

R. Pohorecki and W. Moniuk, Kinetics of reaction between carbon dioxide and hydroxyl ions in aqueous electrolyte solutions, Chemical Engineering Science, vol.43, issue.7, pp.1677-1684, 1988.
DOI : 10.1016/0009-2509(88)85159-5

L. Raynal and A. Royon-lebeaud, A multi-scale approach for CFD calculations of gas???liquid flow within large size column equipped with structured packing, Chemical Engineering Science, vol.62, issue.24, pp.7196-7204, 2007.
DOI : 10.1016/j.ces.2007.08.010

L. Raynal, C. Boyer, and J. P. Ballaguet, Liquid Holdup and Pressure Drop Determination in Structured Packing with CFD Simulations, The Canadian Journal of Chemical Engineering, vol.56, issue.5, pp.871-879, 2004.
DOI : 10.1002/cjce.5450820502

L. Raynal, A. Gomez, B. Caillat, and Y. Haroun, CO 2 Capture Cost Reduction: use of a Multiscale Simulations Strategy for a Multiscale Issue, Oil Gas Sci, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00933990

F. Seibert, I. Wilson, C. Lewis, and G. Rochelle, Effective Gas/Liquid Contact Area of Packing for CO 2 absorption/stripping , Greenhouse Gas Control Technol, pp.1925-1928, 2005.

L. Spiegel and W. Meier, A generalized pressure drop model for structured packings, Distillation and Absorption, IChemE Symp. Series, vol.128, pp.85-94, 1992.

L. Spiegel and W. Meier, Capacity and pressure drop of structured packings at very high liquid loads, AIChE Spring National Meeting, pp.17-21, 1994.

R. E. Tsai, Mass Transfer Area of Structured Packing, 2010.

R. E. Tsai, P. Schultheiss, A. Kettner, J. C. Lewis, A. F. Seibert et al., Influence of Surface Tension on Effective Packing Area, Industrial & Engineering Chemistry Research, vol.47, issue.4, pp.1253-1260, 2008.
DOI : 10.1021/ie070780l

R. E. Tsai, A. F. Seibert, R. B. Eldridge, and G. T. Rochelle, A dimensionless model for predicting the mass-transfer area of structured packing, AIChE Journal, vol.40, issue.5, pp.1173-1184, 2011.
DOI : 10.1002/aic.12345

G. B. Wallis, One-dimensional two-phase flow, 1969.

I. D. Wilson, Gas-Liquid Contact Area of Random and Structured Packing, 2004.