M. J. Thiercelin, B. Dargaud, J. F. Baret, and W. J. Rodriguez, Cement design based on cement mechanical response, SPE Annual Technical Conf. and Exhibition (ATCE '97), pp.5-8, 1997.
DOI : 10.2118/52890-pa

M. Bosma, K. Ravi, W. Van-driel, J. Schreppers, and G. , Design Approach to Sealant Selection for the Life of the Well, SPE Annual Technical Conference and Exhibition, pp.3-6, 1999.
DOI : 10.2118/56536-MS

D. Lullo, G. Rae, and P. , Cements for Long Term Isolation - Design Optimization by Computer Modelling and Prediction, IADC/SPE Asia Pacific Drilling Technology, pp.1-14, 2000.
DOI : 10.2118/62745-MS

L. Boukhelifa, N. Moroni, S. G. James, L. Roy-delage, S. Thiercelin et al., Evaluation of cement systems for oil and gas well zonal isolation in a full-scale annular geometry, IADC/SPE Drilling Conference, pp.2-4, 2004.

R. Angelo, T. J. Plona, L. M. Schwartz, and P. Coveney, Ultrasonic measurements on hydrating cement slurries: onset of shear wave propagation, Adv. Cem. Bas. Mat, vol.21, pp.8-14, 1995.

A. Boumiz, C. Vernet, and F. Cohen-tenoudji, Mechanical properties of cement pastes and mortars at early ages, Advanced Cement Based Materials, vol.3, issue.3-4, pp.3-4, 1996.
DOI : 10.1016/S1065-7355(96)90042-5

J. C. Lacouture, P. A. Johnson, and F. Cohen-tenoudji, Study of critical behavior in concrete during curing by application of dynamic linear and nonlinear means, The Journal of the Acoustical Society of America, vol.113, issue.3, pp.1325-1332, 2003.
DOI : 10.1121/1.1543927

D. Lootens, P. He´braudhe´braud, E. Le´colierle´colier, and H. Van-damme, Gelation, Shear-Thinning and Shear-Thickening in Cement Slurries, Oil & Gas Science and Technology, vol.59, issue.1, pp.31-40, 2004.
DOI : 10.2516/ogst:2004004

Z. Sun, T. Voigt, and S. P. Shah, Rheometric and ultrasonic investigations of viscoelastic properties of fresh Portland cement pastes, Cement and Concrete Research, vol.36, issue.2, pp.278-287, 2006.
DOI : 10.1016/j.cemconres.2005.08.007

G. Trtnik, G. Turk, . Kavc?ic?fkavc?ic?kavc?ic?f, and V. B. Bosiljkov, Possibilities of using the ultrasonic wave transmission method to estimate initial setting time of cement paste, Cement and Concrete Research, vol.38, issue.11, pp.1336-1342, 2008.
DOI : 10.1016/j.cemconres.2008.08.003

T. Voigt and S. P. Shah, Properties of early-age Portland cement mortar monitored with shear wave reflection method, ACI Materials J, vol.101, issue.6, pp.473-482, 2004.

G. Ye, K. Van-breugel, and A. L. Fraaij, Experimental study and numerical simulation on the formation of microstructure in cementitious materials at early age, Cement and Concrete Research, vol.33, issue.2, pp.233-239, 2003.
DOI : 10.1016/S0008-8846(02)00891-8

T. Voigt, T. Malonn, and S. P. Shah, Green and early age compressive strength of extruded cement mortar monitored with compression tests and ultrasonic techniques, Cement and Concrete Research, vol.36, issue.5, pp.858-867, 2006.
DOI : 10.1016/j.cemconres.2005.09.005

B. R. Reddy, A. Santra, D. Mcmechan, D. Gray, C. Brenneis et al., Cement mechanical property measurements under wellbore conditions, SPE Drill, Complet, vol.22, issue.1, pp.33-38, 2007.

J. M. Torrenti and F. Benboudjema, Mechanical threshold of cementitious materials at early age, Materials and Structures, vol.31, issue.4, pp.299-304, 2005.
DOI : 10.1007/BF02479294
URL : https://hal.archives-ouvertes.fr/hal-00023122

C. Haecker, E. J. Garboczi, J. W. Bullard, R. B. Bohn, Z. Sun et al., Modeling the linear elastic properties of Portland cement paste, Cement and Concrete Research, vol.35, issue.10, 1948.
DOI : 10.1016/j.cemconres.2005.05.001

S. Bishnoi and K. L. Scrivener, ??ic: A new platform for modelling the hydration of cements, Cement and Concrete Research, vol.39, issue.4, pp.266-274, 2009.
DOI : 10.1016/j.cemconres.2008.12.002

E. Garboczi and J. Bullard, Virtual concrete in real time, Concrete Producer 27, pp.19-22, 2009.

O. Bernard, F. J. Ulm, and E. Lemarchand, A multiscale micromechanics-hydration model for the early-age elastic properties of cement-based materials, Cement and Concrete Research, vol.33, issue.9, pp.1293-1309, 2003.
DOI : 10.1016/S0008-8846(03)00039-5
URL : https://hal.archives-ouvertes.fr/hal-00139284

S. Ghabezloo, Association of macroscopic laboratory testing and micromechanics modelling for the evaluation of the poroelastic parameters of a hardened cement paste, Cement and Concrete Research, vol.40, issue.8, pp.1197-1210, 2010.
DOI : 10.1016/j.cemconres.2010.03.016
URL : https://hal.archives-ouvertes.fr/hal-00466680

Q. V. Le, F. Meftah, Q. C. He, and Y. Le-pape, Creep and relaxation functions of a heterogeneous viscoelastic porous medium using the Mori-Tanaka homogenization scheme and a discrete microscopic retardation spectrum, Mechanics of Time-Dependent Materials, vol.12, issue.1, pp.3-4, 2008.
DOI : 10.1007/s11043-008-9051-z
URL : https://hal.archives-ouvertes.fr/hal-00833860

S. Nemat-nasser and M. Hori, Micromechanics: Overall Properties of Heterogeneous Materials, Journal of Applied Mechanics, vol.63, issue.2, 1999.
DOI : 10.1115/1.2788912

G. Milton, The theory of composites, 2002.
DOI : 10.1017/CBO9780511613357

A. Zaoui, Mate´riauxhe´te´rogènes et composites, Courses of the Ecole Polytechnique A model for two types of calcium silicate hydrate in the microstructure of Portland cement pastes, Cem. Concr. Res, vol.306, issue.26, pp.855-863, 1997.

. Herveé and A. Zaoui, inclusion-based micromechanical modelling, International Journal of Engineering Science, vol.31, issue.1, pp.1-10, 1993.
DOI : 10.1016/0020-7225(93)90059-4

G. S. Kell, Density, thermal expansivity, and compressibility of liquid water from 0.deg. to 150.deg.. Correlations and tables for atmospheric pressure and saturation reviewed and expressed on 1968 temperature scale, Journal of Chemical & Engineering Data, vol.20, issue.1, pp.97-105, 1975.
DOI : 10.1021/je60064a005

P. J. Monteiro and C. T. Chang, The elastic moduli of calcium hydroxide, Cement and Concrete Research, vol.25, issue.8, pp.1605-1609, 1995.
DOI : 10.1016/0008-8846(95)00154-9

P. Acker, Micromechanical analysis of creep and shrinkage mechanisms, creep, shrinkage and durability mechanics of concrete and other quasi-brittle materials, Proc. of the 6th International Conference CONCREEP6, pp.20-22, 2001.

K. Velez, S. Maximilien, D. Damidot, G. Fantozzi, and F. Sorrentino, Determination by nanoindentation of elastic modulus and hardness of pure constituents of Portland cement clinker, Cement and Concrete Research, vol.31, issue.4, pp.555-561, 2001.
DOI : 10.1016/S0008-8846(00)00505-6

G. Constantinides and F. J. Ulm, The effect of two types of C-S-H on the elasticity of cement-based materials: Results from nanoindentation and micromechanical modeling, Cement and Concrete Research, vol.34, issue.1, pp.1293-1309, 2004.
DOI : 10.1016/S0008-8846(03)00230-8

F. J. Ulm and O. Coussy, Couplings in early-age concrete: From material modeling to structural design, International Journal of Solids and Structures, vol.35, issue.31-32, pp.31-32, 1998.
DOI : 10.1016/S0020-7683(97)00317-X

C. Pichler, R. Lackner, and H. A. Mang, A multiscale micromechanics model for the autogenous-shrinkage deformation of early-age cement-based materials, Engineering Fracture Mechanics, vol.74, issue.1-2, pp.1-2, 2006.
DOI : 10.1016/j.engfracmech.2006.01.034

J. I. Escalante-garcia and J. H. Sharp, Effect of temperature on the hydration of the main clinker phases in portland cements: part i, neat cements, Cement and Concrete Research, vol.28, issue.9, pp.1245-1257, 1998.
DOI : 10.1016/S0008-8846(98)00115-X

H. F. Taylor, Cement chemistry Linear and non-linear behaviour of cement and silica suspensions. Effect of polymer addition, Rheol. Acta, vol.46, issue.6, pp.793-802, 1997.

T. C. Hansen, Physical structure of hardened cement paste. A classical approach, Materials and Structures, vol.53, issue.8/9, pp.423-436, 1986.
DOI : 10.1007/BF02472146

M. Bourissai, Comportement thermo-chimio-hydrome´caniqueme´canique d'un ciment pe´trolierpe´trolier autrè s jeune a?gea?ge en conditions de prise HP/HT. Approche expe´rimentaleexpe´rimentale et analyse par changement d'e´chellee´chelle, 2010.

M. Heikal, M. S. Morsy, and I. Aiad, Effect of treatment temperature on the early hydration characteristics of superplasticized silica fume blended cement pastes, Cement and Concrete Research, vol.35, issue.4, pp.680-687, 2005.
DOI : 10.1016/j.cemconres.2004.06.012

A. Franceschini, S. Abramson, V. Mancini, B. Bresson, C. Chassenieux et al., New covalent bonded polymer???calcium silicate hydrate composites, J. Mater. Chem., vol.25, issue.9, pp.913-922, 2007.
DOI : 10.1039/B613077A
URL : https://hal.archives-ouvertes.fr/hal-00164924

M. Bourissai, Evolution of the Elastic Properties of an Oilwell Cement Paste at Very Early Age under Downhole Conditions: Characterization and Modelling, Oil & Gas Science and Technology ??? Revue d???IFP Energies nouvelles, vol.68, issue.3
DOI : 10.2516/ogst/2012087
URL : https://hal.archives-ouvertes.fr/hal-00864247